2in1 LED Fill Light + Speedlite Bi-Color Adjustable 2500-6500K for Most Camera

2in1 LED Fill Light + Speedlite Bi-Color Adjustable 2500-6500K for Most Camera Popis

It's a fill light, 2500-6500K and brightness both adjustable, built-in diffuser, Also a speedlite, around 6500K. Support to flash when shoot by smartphone. Charge by type-C cable, compatible with most mirrorless cameras.
Instructions: 1. Long press the power button for more than 3 seconds to turn or off the lights. If not used for a long , please turn off the power, avoid light, and store in a dry place. 2. It has two lighting modes: Bi-Color fill light mode, Flash mode. After turning , short press the power button to between two modes.
Bi-Color fill light mode: 1. Long press the power button to start. If both brightness and color temperature lights are with the front LED panel, it's in Bi-color fill light mode. Otherwise, by short pressing the power button. 2. Adjust lighting color temperature and brightness for photos or videos. Use it handheld, attach to the camera's hot shoe, or use a cold shoe device.

Flash mode for camera:
1. After starting, if only the brightness light is , it's in flash mode. Otherwise, by short pressing the power button.
2. Test the flash when the button lights red and the capacitor is fully charged. Face the light away from you.
3. Install onto the camera's hot shoe, lock the knob, and long press the power button to activate the flash. Set the camera to M mode for accurate exposure.
4. Flash does not support automatic exposure (TTL). Sync with shutter speed to 1/250. Adjust power using the D button.
5. Designed for most cameras. Some may need additional settings.
Flash mode for Smartphone:
1. Ensure it's in flash mode. Long press the photography button and turn your phone's b1uet00th. Scan for "VLOGLITE" and pair.
2. light flashing means searching. Steady light indicates successful connection.
3. Open camera mode, aim,