Obrázky produktu
2X 250-301 Quick Change Turning Facing Lathe Tool Post Holder
Nové
Na sklade
Prečo si zamilujete nakupovanie na OnBuy:
- Získajte cashback pri každom nákupe – použite ho okamžite na ďalšiu objednávku
- Doprava zadarmo – na milióny produktov na celej stránke
- Zákazníci nás milujú – 126,000 hodnotení s “Vynikajúcim” hodnotením
65,21 €
110,94 €
41 % zľava!
+17,92 € doručenie
1%
Získajte 0,65 € okamžite
Zistiť viac
Ceny produktov predávaných spoločnosťou OnBuy sú uvedené s DPH.
K dispozícii sú aj bezúročné možnosti platby
Zobraziť celý popis a podrobnosti o produkte
Doručenie: Štandard (17,92 €) | pon 29 jún - sob 4 júl
Predáva: SK Shopping center
Vrátenie tovaru: 30 dní
180-dňová ochrana platieb
Najobľúbenejšie v Štiepače guľatiny
Popis a podrobnosti
Zhrnutie
- Very well made, no tool marks, rough edges, or dimensional variations. The tool holding set screws are very solid and no loose,This tool holder has a nice fit and finish. The paint coating is solid, no flaking or any signs of poor surface prep.
- Quality made, heat treated and nicely ground, exact fit to your tool post and save a lot of time
- All the dimensions were a perfect fit and can be able to set up tools in tool holders for special jobs. The turning and facing lathe tool works perfectly in CXA 250-301 tool post.
- Securely holds 1/2 inch - 3/4 inch square tool bits, This tool holder fit your quick change block and tight up on a tool, For use with CXA tool posts 250-300 or 250-333.
- 13-18 inch swing, Turning and facing tools can be locked together and saving time and labor when changing operations, It can be installed on the lathe quickly and easily. And it is a great addition to your lathe.
2X 250-301 Quick Change Turning Facing Lathe Tool Post Holder Popis
Very well made, no tool marks, rough edges, or dimensional variations. The tool holding set screws are very solid and no loose,This tool holder has a nice fit and finish. The paint coating is solid, no flaking or any signs of poor surface prep.
Quality made, heat treated and nicely ground, exact fit to your tool post and save a lot of
All the dimensions were a perfect fit and can be able to set tools in tool holders for special jobs. The turning and facing lathe tool works perfectly in CXA 250-301 tool post.
Securely holds 1/2 inch - 3/4 inch square tool bits, This tool holder fit your quick change block and tight a tool, For use with CXA tool posts 250-300 or 250-333.
13-18 inch swing, Turning and facing tools can be locked together and saving and labor when changing operations, It can be installed the lathe quickly and easily. And it is a great addition to your lathe.
Material:metal
colour:black
Package Contents:
2 x 250-301 Tool Holder
Podrobnosti
| OPC | PS67Q25 |
|---|---|
| Kódy | 4711062055674 (EAN) |
Údaje o produkte
| Height | 8cm |
|---|---|
| Width | 11cm |
| Length | 12cm |
| Weight | 2.35kg |
| Colour | Black |
| Material | metal |
Porovnajte predajcov pre 2X 250-301 Quick Change Turning Facing Lathe Tool Post Holder
- Nové od 83,13 €
| Predajca | Recenzie | Záruka | Vrátenie tovaru | Cena | Doručenie | Celkom | Množstvo |
|---|---|---|---|---|---|---|---|
|
Odoslané z:
|
(228 recenzií) | - |
30 dní
Bezplatné vrátenie tovaru Nie
|
65,21 €
|
+17,92 € Delivery
Odhadované doručenie:
29 jún - 4 júl
|
83,13 €
|
Zarábajte pri nakupovaní s okamžitým Cashback na všetko.
Žiadny háčik, žiadne náklady
- Pripísané na váš OnBuy účet
- Použite ho na váš ďalší nákup
- Ušetrite alebo si vyberajte
Staňte sa Cashback VIP
Už 1 nákup odomkne lepšie ponuky a zľavy