Trhová platforma s Cashback Okamžité odmeny za všetko Doprava zadarmo na milióny produktov Vysoko hodnotené Výborné hodnotenia na Trustpilote Staňte sa Cashback VIP Vyššie zľavy, lepšie ponuky 30-dňové vrátenie tovaru Plus ochrana nákupu

Sorry, this item is temporarily out of stock.

2X ESP32-S3 4.3inch Touch LCD Development Board with Case, 800x480, 5-Point Touch, 32-Bit LX7 Dual-Core Processor

New

Podobné produkty, ktoré by sa vám mohli páčiť

Pamäťové moduly tlačiarne

Would you like us to let you know when it's back?

Pridať do košíka

Popis a podrobnosti

Zhrnutie

This version comes with a plastic case. Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BLT 5 (LE), with onboard antenna.
Built in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 4.3inch capacitive touch display, 800x480 resolution, 65K color. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support.
Onboard voltage regulator, supports 7-36V wide range power supply. Onboard CAN, RS485, I2C interface and TF card slot, GH1.25 2P battery header and digital isolated IO interfaces, etc.
Supports passive and active digital input, with bi-directional optocoupler isolation. Supports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking current.
Onboard LED indicators for indicating the power and battery recharging status. Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios.

2X ESP32-S3 4.3inch Touch LCD Development Board with Case, 800x480, 5-Point Touch, 32-Bit LX7 Dual-Core Processor Popis

This version comes with a plastic case. Equipped with Xtensa 32-bit LX7 dual-core processor, to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BLT 5 (LE), with onboard antenna.
Built in 512KB and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 4.3inch capacitive touch display, 800x480 resolution, 65K color. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support.
Onboard voltage regulator, supports 7-36V wide range power supply. Onboard CAN, RS485, I2C interface and TF card slot, GH1.25 2P battery header and digital isolated IO interfaces, etc.
Supports passive and active digital input, with bi-directional optocoupler isolation. Supports digital output with optocoupler isolation, provides higher driving capability with to 450mA sinking current.
Onboard LED indicators for indicating the power and battery recharging status. Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios.

Colour:Black
Material:ABS

Package Contents:
2 x Development Board with Case

Podrobnosti