Obrázky produktu
Na sklade
Prečo si zamilujete nakupovanie na OnBuy:
Ceny produktov predávaných spoločnosťou OnBuy sú uvedené s DPH.
Zobraziť celý popis a podrobnosti o produkte
Doručenie: Štandard (5,53 €) | str 2 - uto 8 dec
Predáva: Meillä on mitä haluat
Vrátenie tovaru: 30 dní
180-dňová ochrana platieb
Zhrnutie
The function of the tool setting instrument The measurement and compensation of the tool offset value in five directions can effectively eliminate the error and inefficiency caused by manual tool setting. No matter what kind of cutting tool is used for workpiece contour turning or milling, all tool tip points or tool axis lines involved in cutting must be adjusted or compensated so that they are accurately located at the same theoretical point or axis of the workpiece coordinate system -
How to use:
1.Alligator clip is fixed the cutter
2.DuPont port has been connected to the control board (A5 interface the 3018pro control board)
3.Place (plastic + aluminum plate) under the tool
material: plastic
Color as shown
GRBL Z-probe CNC Router Tool Setting Automatic Tool Setter. Thickness: 1.6mm (0.03mm)
Tool Setting Function It can accurately locate the working surface, and is most suitable for PCB engraving.
Easy to Use You can refer to our video to understand how to use it correctly.
Probe Command Please change the Probe command in Grbl to: G91G21G38.2Z-30F100;G92Z1.6;G0Z5F10
What does G91G21G38.2Z-30F100;G92Z1.6;G0Z5F10 mean:
G91: Use relative coordinate mode
G21: Use mm unit
G38.2: Tool setting instruction
Z-30: The Z axis moves 30mm in the negative direction, if it touches the tool setter, it will stop and set this point as the origin
F100: the speed of the Z-axis when it is running
;: Newline, next instruction
G92: Coordinate offset, because the tool setter has a thickness, in order to remove the thickness of the tool setter, you need to set the offset
Z1.6: Z-axis offset 1.6, 1.6 is the thickness of the tool setter, which is subject to the actual measured thickness of the tool setter
;: Newline, next instruction
G0: fast moving
Z5: The Z axis
Podrobnosti
| OPC | PYJT65R |
|---|---|
| Kódy | 6031373112940 (EAN) |
| Informácie o produkte a bezpečnosti |
Údaje o produkte
| Height | 2cm |
|---|---|
| Width | 6cm |
| Length | 10cm |
| Weight | 0.031kg |
| Colour | As Shown |
| Material | Plastic |
| Predajca | Recenzie | Záruka | Vrátenie tovaru | Cena | Doručenie | Celkom | Množstvo |
|---|---|---|---|---|---|---|---|
|
Odoslané z:
|
(202 recenzií) | - |
30 dní
Bezplatné vrátenie tovaru Nie
|
10,28 €
|
+5,53 € Delivery
Odhadované doručenie:
2-8 dec
|
15,81 €
|
Zarábajte pri nakupovaní s okamžitým Cashback na všetko.
Žiadny háčik, žiadne náklady
Staňte sa Cashback VIP
Už 1 nákup odomkne lepšie ponuky a zľavy
Okamžitý cashback získate iba na OnBuy! Zadajte svoj e-mail nižšie a pošleme vám kópiu vášho košíka, aby ste si ušetrili čas neskôr.
Zadaním svojej e-mailovej adresy budete automaticky pridaný do našej databázy, kde môžete využívať personalizované cashback ponuky a získať skorý prístup k našim najlepším akciám. Z odberu našich e-mailov sa môžete kedykoľvek odhlásiť a vaše údaje nikdy neposkytneme nikomu inému. Viac informácií nájdete v našich Zásadách ochrany osobných údajov a Obchodných podmienkach.
Získajte prístup k ponukám šitým na miestu a najvyšším cashback sadzbám! Prihláste sa na odber našich e-mailov nižšie.
Z odberu našich e-mailov sa môžete kedykoľvek odhlásiť a vaše údaje nikdy neposkytneme nikomu inému. Viac informácií nájdete v našich Zásadách ochrany osobných údajov a Obchodných podmienkach.
Táto stránka vypršala.
Obnoviť a pokračovať