Obrázky produktu
3D Printer UCAN Board Based STM32F072 USB to CAN Adapter Support with for CAnable / CandleLight / Klipper Firmware
Nové
Na sklade
Prečo si zamilujete nakupovanie na OnBuy:
- Získajte cashback pri každom nákupe – použite ho okamžite na ďalšiu objednávku
- Doprava zadarmo – na milióny produktov na celej stránke
- Zákazníci nás milujú – 127,000 hodnotení s “Vynikajúcim” hodnotením
13,98 €
16,77 €
17 % zľava!
+4,02 € doručenie
1%
Čo je okamžitý Cashback?
Zistiť viac
Ceny produktov predávaných spoločnosťou OnBuy sú uvedené s DPH.
K dispozícii sú aj bezúročné možnosti platby
Zobraziť celý popis a podrobnosti o produkte
Doručenie: Štandard (4,02 €) | str 8 - uto 14 júl
Predáva: CollBea
Vrátenie tovaru: 30 dní
180-dňová ochrana platieb
Najobľúbenejšie v Pamäťové moduly tlačiarne
Popis a podrobnosti
Zhrnutie
- UCAN is a small low-cost open source USB to CAN adapter, compatible with CANable hardware. The UCAN enumerates as a virtual serial port on the computer and acts as a serial-line for the CAN bus interface.
- With the alternative Candlelight firmware, UCAN is enumerated as the native CAN interface on Linux.
- The UCAN adapter is compatible with ARM-based embedded platforms such as for Raspberry Pi, for Raspberry Pi Zero, for ODROID, for BeagleBone, etc. At the same time, it can also be used as USB to CAN application on Klipper.
- supports CANable
- 3D Printer UCAN Board
3D Printer UCAN Board Based STM32F072 USB to CAN Adapter Support with for CAnable / CandleLight / Klipper Firmware Popis
UCAN is a small low-cost open source USB to CAN adapter, compatible with CANable hardware. The UCAN enumerates as a virtual serial port the computer and acts as a serial- for the CAN bus interface.
With the alternative Candlelight firmware, UCAN is enumerated as the native CAN interface Linux.
The UCAN adapter is compatible with ARM-based embedded platforms such as for Raspberry Pi, for Raspberry Pi Zero, for ODROID, for BeagleBone, etc. At the same , it can also be used as USB to CAN application Klipper.
Based STM32F072
Type-C USB socket
Supports CAN2.0A and B, baud rates to 1M
Compatible with CANable
Support with for CAnable / CandleLight / Klipper firmware
3-pin screw terminal: CANH, CANL, GND
Jumper to enter bootloader for firmware updates
Onboard 120R termination default or Jumper to enable/disable termination
type: UCAN Board
color:Black+green
Material:PCB+plastic+metal
Package Contents:
1 x UCAN Board
Podrobnosti
| OPC | PRXX5QM |
|---|---|
| Kódy | 4713191168041 (EAN) |
Údaje o produkte
| Height | 2cm |
|---|---|
| Width | 2cm |
| Length | 7cm |
| Weight | 0.008kg |
| Colour | Black&green |
| Material | PCB+plastic+metal |
Porovnajte predajcov pre 3D Printer UCAN Board Based STM32F072 USB to CAN Adapter Support with for CAnable / CandleLight / Klipper Firmware
- Nové od 18,00 €
| Predajca | Recenzie | Záruka | Vrátenie tovaru | Cena | Doručenie | Celkom | Množstvo |
|---|---|---|---|---|---|---|---|
|
Odoslané z:
|
(191 recenzií) | - |
30 dní
Bezplatné vrátenie tovaru Nie
|
13,98 €
|
+4,02 € Delivery
Odhadované doručenie:
8-14 júl
|
18,00 €
|
Zarábajte pri nakupovaní s okamžitým Cashback na všetko.
Žiadny háčik, žiadne náklady
- Pripísané na váš OnBuy účet
- Použite ho na váš ďalší nákup
- Ušetrite alebo si vyberajte
Staňte sa Cashback VIP
Už 1 nákup odomkne lepšie ponuky a zľavy