Prepáčte, táto položka je dočasne vypredaná.
3X Voltage Generator Module 0-10V 10MA Adjustable Analog Voltage Signal Generator Used for PLC MCU
Podobné produkty, ktoré by sa vám mohli páčiť
Chceš, aby sme ti dali vedieť, keď bude späť?
Zhrnutie
- This module can convert the input voltage supply into 0-10V adjustable analog voltage output.
- The maximum output current is approx. 10mA.
- It can match with most PLC and MCU or industrial controller analog interface standards.
- This product can not be used as a power supply module, but can only be used as an analog voltage output.
- The input supply voltage should be at least 2V higher than the output analog voltage, the maximum power supply should not exceed 30V.
3X Voltage Generator Module 0-10V 10MA Adjustable Analog Voltage Signal Generator Used for PLC MCU Popis
This module can convert the input voltage supply into 0-10V adjustable analog voltage output.
The maximum output current is approx. 10mA.
It can match with most PLC and MCU or industrial controller analog interface standards.
This product can not be used as a power supply module, but can only be used as an analog voltage output.
The input supply voltage should be at least 2V higher than the output analog voltage, the maximum power supply should not exceed 30V.
Name: Voltage generator
Model: 0-10V
Wiring:
1. 15-32VDC: power supply positive
2. GND (left): power supply negative
3. GND (right): output voltage negative
4. VOUT: Output voltage positive
Weight: 150g (approx.)
Colour: white
Material: ABS + electronic components
Package Contents:
3 x voltage signal generator
Podrobnosti
| OPC | PWJQNFJ |
|---|---|
| Značka | Typecat |
| Kódy | 4711321993853 (EAN) |
| Informácie o produkte a bezpečnosti |
Údaje o produkte
| Height | 9cm |
|---|---|
| Width | 6cm |
| Length | 10cm |
| Weight | 0.15kg |
| Colour | white |
| Material | ABS + electronic components |