Obrázky produktu
5PCS Screen Protector for Mono 2, 3D Printer Screen Protector Film for Mono 2 6.6Inch 4K Resin 3D Printer
Nové
Na sklade
Prečo si zamilujete nakupovanie na OnBuy:
- Získajte cashback pri každom nákupe – použite ho okamžite na ďalšiu objednávku
- Doprava zadarmo – na milióny produktov na celej stránke
- Zákazníci nás milujú – 135,000 hodnotení s “Vynikajúcim” hodnotením
12,44 €
18,66 €
33 % zľava!
+4,00 € doručenie
1%
Čo je okamžitý Cashback?
Zistiť viac
Ceny produktov predávaných spoločnosťou OnBuy sú uvedené s DPH.
Zobraziť celý popis a podrobnosti o produkte
Doručenie: Štandard (4,00 €) | pia 9 - štv 15 okt
Predáva: najlepšie
Vrátenie tovaru: 30 dní
180-dňová ochrana platieb
Mohlo by sa vám tiež páčiť
Popis a podrobnosti
Zhrnutie
- Screen protector: The screen protector can prevent the resin pollution screen when the FEP is damaged, extend the use time of the LCD screen, and save the cost of replacing the screen.
- The light transmission rate exceeds 95%: The light transmission rate of the screen protective film is above 95%, which will not affect the ultraviolet rays of the 405nm wavelength through the protective film and solidify the resin, which can maintain the printing accuracy of the 3D printer.
- High -quality screen protector: The screen protector is made of high -quality PET materials imported from Japan. The double -mask ensures that it will not be scratched before use, and the edge of the edge will not produce white edges after paste. Therefore, it will not affect the printing amount after installation, just level it.
- You can refer to the installation steps in the picture for operation, and use a spatula to avoid air bubbles during installation.
- Compatible model: Screen protector is for Anycubic Photon Mono 2 LCD Resin 3D printer.
5PCS Screen Protector for Mono 2, 3D Printer Screen Protector Film for Mono 2 6.6Inch 4K Resin 3D Printer Popis
Screen protector: The screen protector can prevent the resin pollution screen when the FEP is damaged, extend the use of the LCD screen, and save the cost of replacing the screen.
The light transmission rate exceeds 95%: The light transmission rate of the screen protective film is above 95%, which will not affect the ultraviolet rays of the 405nm wavelength through the protective film and solidify the resin, which can maintain the printing accuracy of the 3D printer.
High -quality screen protector: The screen protector is made of high -quality PET materials imported from Japan. The double -mask ensures that it will not be scratched before use, and the of the will not produce white edges after paste. Therefore, it will not affect the printing amount after installation, just level it.
You can refer to the installation steps in the picture for operation, and use a spatula to avoid air bubbles during installation.
Compatible model: Screen protector is for Photon Mono 2 LCD Resin 3D printer.
Material: PET
colour: transparent
Package Contents:
5 x Screen Protector
Podrobnosti
| OPC | PXZ79TP |
|---|---|
| Kódy | 4712467364491 (EAN) |
| Informácie o produkte a bezpečnosti |
Údaje o produkte
| Height | 1cm |
|---|---|
| Width | 16cm |
| Length | 23cm |
| Weight | 0.0755kg |
| Colour | Transparent |
| Material | PET |
Porovnajte predajcov pre 5PCS Screen Protector for Mono 2, 3D Printer Screen Protector Film for Mono 2 6.6Inch 4K Resin 3D Printer
- Nové od 16,44 €
| Predajca | Recenzie | Záruka | Vrátenie tovaru | Cena | Doručenie | Celkom | Množstvo |
|---|---|---|---|---|---|---|---|
|
Odoslané z:
|
(282 recenzií) | - |
30 dní
Bezplatné vrátenie tovaru Nie
|
12,44 €
|
+4,00 € Delivery
Odhadované doručenie:
9-15 okt
|
16,44 €
|
Zarábajte pri nakupovaní s okamžitým Cashback na všetko.
Žiadny háčik, žiadne náklady
- Pripísané na váš OnBuy účet
- Použite ho na váš ďalší nákup
- Ušetrite alebo si vyberajte
Staňte sa Cashback VIP
Už 1 nákup odomkne lepšie ponuky a zľavy