5PCS TB6612FNG Dual Motor Driver Controller Board Stepper Motor Driver Module for Raspberry Pi ESP32
Na sklade
Prečo si zamilujete nakupovanie na OnBuy:
- Získajte cashback pri každom nákupe – použite ho okamžite na ďalšiu objednávku
- Doprava zadarmo – na milióny produktov na celej stránke
- Zákazníci nás milujú – 135,000 hodnotení s “Vynikajúcim” hodnotením
Ceny produktov predávaných spoločnosťou OnBuy sú uvedené s DPH.
Zobraziť celý popis a podrobnosti o produkte
Doručenie: Štandard (Zadarmo) | pon 19 - pia 23 okt
Predáva: Papishop
Vrátenie tovaru: 30 dní
180-dňová ochrana platieb
Mohlo by sa vám tiež páčiť
Zhrnutie
- Drive voltage: YM input 4.5-10V, Logic level: VCC input 2.7-5.5V
- TB6612FNG is a dual channel DC motor driver chip. It adopts an H-bridge design and can independently drive two DC motors or one stepper motor, suitable for projects such as robots and small intelligent vehicles.
- This TB6612FNG module has significantly improved efficiency and reduced size. Please note that positive and negative (wire connection), recommended input voltage for TB6612FNG module is 12V or below.
- This chip supports forward and reverse rotation, braking, and standby functions, with specific features of high efficiency and low power consumption. Can provide MAX with a continuous current of 1.2A per channel and a peak current of up to 3.2A.
- The working voltage range is wide, and it integrates overheating and undervoltage protection, which is widely used in embedded control systems.
5PCS TB6612FNG Dual Motor Driver Controller Board Stepper Motor Driver Module for Raspberry Pi ESP32 Popis
Drive voltage: YM input 4.5-10V, Logic level: VCC input 2.7-5.5V
TB6612FNG is a dual channel motor driver chip. It adopts an H-bridge design and can independently drive two motors or one stepper motor, suitable for projects such as robots and small intelligent vehicles.
This TB6612FNG module has significantly improved efficiency and reduced size. Please note that positive and negative (wire connection), recommended input voltage for TB6612FNG module is 12V or below.
This chip supports forward and reverse rotation, braking, and standby functions, with specific features of high efficiency and low power consumption. Can provide MAX with a continuous current of 1.2A per channel and a current of to 3.2A.
The working voltage range is wide, and it integrates overheating and undervoltage protection, which is widely used in embedded control systems.
Color: As Shown
Material: Plastic+Metal
Package Contents:
5* Module
Podrobnosti
| OPC | PYHZZJD |
|---|---|
| Značka | Typecat |
| Kódy | 4712458363045 (EAN) |
| Informácie o produkte a bezpečnosti |
Údaje o produkte
| Height | 2cm |
|---|---|
| Width | 13cm |
| Length | 19cm |
| Weight | 0.021kg |
| Colour | As Shown |
| Material | Plastic+Metal |
Porovnajte predajcov pre 5PCS TB6612FNG Dual Motor Driver Controller Board Stepper Motor Driver Module for Raspberry Pi ESP32
- Nové od 18,68 €
| Predajca | Recenzie | Záruka | Vrátenie tovaru | Cena | Doručenie | Celkom | Množstvo |
|---|---|---|---|---|---|---|---|
|
Odoslané z:
|
(436 recenzií) | - |
30 dní
Bezplatné vrátenie tovaru Nie
|
18,68 €
|
+Free Delivery
Odhadované doručenie:
19-23 okt
|
18,68 €
|
Zarábajte pri nakupovaní s okamžitým Cashback na všetko.
Žiadny háčik, žiadne náklady
- Pripísané na váš OnBuy účet
- Použite ho na váš ďalší nákup
- Ušetrite alebo si vyberajte
Staňte sa Cashback VIP
Už 1 nákup odomkne lepšie ponuky a zľavy