6- 60V 20A 500W BLDC Three-Phase Brushless Motor Controller PWM Hall Motor Control Driver Board
Na sklade
Prečo si zamilujete nakupovanie na OnBuy:
- Získajte cashback pri každom nákupe – použite ho okamžite na ďalšiu objednávku
- Doprava zadarmo – na milióny produktov na celej stránke
- Zákazníci nás milujú – 131,000 hodnotení s “Vynikajúcim” hodnotením
Ceny produktov predávaných spoločnosťou OnBuy sú uvedené s DPH.
K dispozícii sú aj bezúročné možnosti platby
Zobraziť celý popis a podrobnosti o produkte
Doručenie: Štandard (Zadarmo) | štv 20 - uto 25 aug
Predáva: JJBRDZ
Vrátenie tovaru: 30 dní
180-dňová ochrana platieb
Mohlo by sa vám tiež páčiť
Zhrnutie
- Advanced DC Brushless Motor Controller: Equipped with a Hall sensor, this controller is designed specifically for DC brushless motors with a 120-degree Hall sensor. It supports both PLC 0-5V analog and 2.5-5V PWM control, ensuring versatile and precise motor management. Ideal voltage range from 6-60V, with a peak current of 20A and power up to 500W.
- Efficient Connection Setup: Features five Hall interfaces for comprehensive connectivity. Includes two Hall power supply lines and three Hall signal lines, marked as Ha, Hb, and Hc, ensuring correct and easy setup. Match these with corresponding interfaces on the driver board for optimal performance.
- User-Friendly Operation: The controller board is marked with phase wire interfaces MA (U), MB (V), MC (W) for straightforward connections. Start with the main power supply, adjust the potentiometer throttle to about 20%, and experience smooth motor operation. Ideal for projects requiring reliable motor control.
- Safety and Maintenance Tips: Due to high power and current handling, avoid short-circuiting during setup. Start tests with low current and voltage to ensure safety. Insulate wiring properly to prevent any electrical hazards. Note that the board does not include a fuse; consider adding one to safeguard against power surges.
- Installation Cautions: Ensure correct polarity when connecting the power supply to prevent damage to board components. Do not use motors that exceed the voltage and power specifications of the drive module to avoid operational failures and potential damage.
6- 60V 20A 500W BLDC Three-Phase Brushless Motor Controller PWM Hall Motor Control Driver Board Popis
Advanced Brushless Motor Controller: Equipped with a Hall sensor, this controller is designed specifically for brushless motors with a 120-degree Hall sensor. It supports both PLC 0-5V analog and 2.5-5V PWM control, ensuring versatile and precise motor management. Ideal voltage range from 6-60V, with a current of 20A and to 500W.
Efficient Connection Setup: Features five Hall interfaces for comprehensive connectivity. Includes two Hall power supply lines and three Hall signal lines, marked as Ha, Hb, and Hc, ensuring correct and easy setup. Match these with corresponding interfaces the driver board for optimal performance.
User-Friendly Operation: The controller board is marked with phase wire interfaces MA (U), MB (V), MC (W) for straightforward connections. Start with the main power supply, adjust the potentiometer throttle to about 20%, and experience smooth motor operation. Ideal for projects requiring reliable motor control.
Safety and Maintenance Tips: Due to high power and current handling, avoid short-circuiting during setup. Start tests with low current and voltage to ensure safety. Insulate wiring properly to prevent any electrical hazards. Note that the board does not include a fuse; consider adding one to safeguard against power surges.
Installation Cautions: Ensure correct polarity when connecting the power supply to prevent damage to board components. Do not use motors that exceed the voltage and power specifications of the drive module to avoid operational failures and potential damage.
Color:As Shown
Material:plastic
Package Contents:
1 * Driver module
Podrobnosti
| OPC | PVQ2J5V |
|---|---|
| Značka | Torribaly |
| Kódy | 4712412651379 (EAN) |
| Informácie o produkte a bezpečnosti |
Údaje o produkte
| Height | 3cm |
|---|---|
| Width | 5cm |
| Length | 7cm |
| Weight | 0.0845kg |
| Colour | As Shown |
| Material | Plastic |
Porovnajte predajcov pre 6- 60V 20A 500W BLDC Three-Phase Brushless Motor Controller PWM Hall Motor Control Driver Board
- Nové od 27,08 €
| Predajca | Recenzie | Záruka | Vrátenie tovaru | Cena | Doručenie | Celkom | Množstvo |
|---|---|---|---|---|---|---|---|
|
Odoslané z:
|
(447 recenzií) | - |
30 dní
Bezplatné vrátenie tovaru Nie
|
27,08 €
|
+Free Delivery
Odhadované doručenie:
20-25 aug
|
27,08 €
|
Zarábajte pri nakupovaní s okamžitým Cashback na všetko.
Žiadny háčik, žiadne náklady
- Pripísané na váš OnBuy účet
- Použite ho na váš ďalší nákup
- Ušetrite alebo si vyberajte
Staňte sa Cashback VIP
Už 1 nákup odomkne lepšie ponuky a zľavy