Sorry, this item is temporarily out of stock.

AS5600 Magnetic Angle Sensor Module with STEMMA QT Connectors

New

Podobné produkty, ktoré by sa vám mohli páčiť

Testovacia adaptérová karta pre pamäťové karty Memory Stick Testovacia adaptérová karta pre pamäťové karty v notebooku7,92 €BEZPLATNÉ doručenie

Pamäť RAM DDR3 16GB 1600Mhz DIMM pre stolné počítače pre základnú dosku s päticou AMD39,64 €BEZPLATNÉ doručenie

Pamäť RAM DDR4 3200MHz 16GB Herná pamäť pre stolné počítače PC4-25600 PC4-19200 17000 288Pin DIMM133,54 €BEZPLATNÉ doručenie

Pamäť RAM DDR3 16GB 1600Mhz DIMM pre stolné počítače, socket pre základné dosky30,89 €BEZPLATNÉ doručenie

CORSAIR Vengeance RGB PRO - DDR4 - 256 GB: 8 x 32 GB - DIMM 288-PIN - ungepuffert827,88 €BEZPLATNÉ doručenie

Pamäť RAM DDR4 3200MHz 16GB Herná pamäť pre stolné počítače157,44 €BEZPLATNÉ doručenie

2x 2GB DDR2 PC2-6400 800MHz 200Pin 1.8V pamäť pre notebooky SO-DIMM28,75 €BEZPLATNÉ doručenie

Testovacia adaptérová karta pre pamäťové karty Memory Stick Testovacia adaptérová karta pre pamäťové karty v notebooku7,92 €BEZPLATNÉ doručenie

Would you like us to let you know when it's back?

Pridať do košíka

Popis a podrobnosti

Zhrnutie

Add rotational sensing - without a mechanical connection - with the AS5600 Magnetic Angle Sensor. Featuring the ams AS5600, this board can sense a rotating N/S magnetic field up to 3mm away from the chip body. These sensors are often used to create 'frictionless' rotary encoders or potentiometers, without the risk of mechanical failure or noise.
Magnetic angle sensors get the best of 'both worlds': like rotary encoders they can rotate freely 360 degrees around, and like potentiometers, they have absolute location detection.
All you need is a microcontroller or microcomputer with I2C. Then, identify the north and south of a magnet. (magnet is not included.)
To make usage plug-and-play, we added STEMMA QT connectors for the I2C bus, so you don't even need to solder the I2C and power lines. Simply wire up to your favorite micro using a STEMMA QT adapter cable. QT Cable is not included.
Comes as a fully assembled breakout board a small bit of header. Some light soldering is required to attach the header for use in a breadboard.

AS5600 Magnetic Angle Sensor Module with STEMMA QT Connectors Popis

Add rotational sensing - without a mechanical connection - with the AS5600 Magnetic Angle Sensor. Featuring the ams AS5600, this board can sense a rotating N/S magnetic field to 3mm away from the chip body. These sensors are often used to create 'frictionless' rotary encoders or potentiometers, without the risk of mechanical failure or noise.
Magnetic angle sensors get the best of 'both worlds': like rotary encoders they can rotate freely 360 degrees around, and like potentiometers, they have absolute location detection.
All you need is a microcontroller or microcomputer with I2C. Then, identify the north and south of a magnet. (magnet is not included.)
To make usage plug-and-, we added STEMMA QT connectors for the I2C bus, so you don't even need to solder the I2C and power lines. Simply wire to your favorite micro using a STEMMA QT adapter cable. QT Cable is not included.
Comes as a fully assembled breakout board a small bit of header. Some light soldering is required to attach the header for use in a breadboard.

Note that many round magnets have the N/S alternate 'coin face' sides, so you'll need to rotate it the . Place the magnet near the middle of the chip and rotate it in place. The firmware will detect the magnetic field and report the angle from 0 to 359 with 0.1 precision and 0.4 accuracy.
Color: Black
Material: PCB

Package Contents:
1 * AS5600 Magnetic Angle Sensor Module

Podrobnosti