Chip Universal Test Hook Bios Burn-In Clips Solder-Free DAD Wire Sdk08 Double Hook Ic Logic Analyzer Clips

Chip Universal Test Hook Bios Burn-In Clips Solder-Free DAD Wire Sdk08 Double Hook Ic Logic Analyzer Clips Popis

1. The SDKO8 Test Clip Can Clamp Chip Pins With A Pitch Greater Than 0.3mm.
2. Chip Universal Test Hook
3. Clamping Of Small Pitch Chip Pins
4. Push The Opening Of The Clip Out Until It Is About The Same Size As A Single Pin Of The Chip, And Push It Forward Slightly While Moving It Gently With Your Hand.
5. Do Not Forcefully Pull Off The Clip After Use. Correct Operation Should Push Out The Clip And Gently Remove It From The Chip Pins.

Repair Method For Chip Pins That Cannot Be Clamped Tightly: Use Tweezers To Adjust The Front End Of The Clamp So That The Angle Is Close To 90 Degrees.
Model: SDK08
Rated Voltage: 40V
Rated Current: 2A
Note:Different Batches May Have Differences In Product Appearance, Color, And Printed Characters, Which Will Not Affect The Use
Colour:As Shown
Material:plastic

Package Contents:
10 x Test Clips
1 set x Male And Female Dupont Wires (10 Each)