Trhová platforma s Cashback Okamžité odmeny za všetko Doprava zadarmo na milióny produktov Vysoko hodnotené Výborné hodnotenia na Trustpilote Staňte sa Cashback VIP Vyššie zľavy, lepšie ponuky 30-dňové vrátenie tovaru Plus ochrana nákupu

Sorry, this item is temporarily out of stock.

Compression Puller Tool Remove Ferrule,Ferrule Puller for 1/2In Copper Water Compression Sleeve 1/2In Copper Tubing

New

Podobné produkty, ktoré by sa vám mohli páčiť

Sady príslušenstva pre elektrické náradie

2 ks univerzálna 65 mm reťazová vyžínacia hlava pre kosačku na trávu červená16,92 €BEZPLATNÉ doručenie

4 ks pre držiak Makita 419627-9 ponorná píla SP6000 CA5000 DSP601 DSP600 DHS783/782 príslušenstvo k elektrickému náradiu9,43 €BEZPLATNÉ doručenie

2 ks 5 mm x 8 mm x 13 mm uhlíkové kefy pre uhlovú brúsku pre orbitálnu brúsku3,38 €BEZPLATNÉ doručenie

Sada valcov na krovinorez, vyžínač a živý plot TL26/CG260 1E34F s priemerom 34 mm12,97 €BEZPLATNÉ doručenie

36 ks náhradných čepelí pre Luba a Yuka všetky série16,87 €BEZPLATNÉ doručenie

120W vodotesná elektrická škrabka na rybie šupiny, zástrčka EÚ34,32 €BEZPLATNÉ doručenie

14-zubový jednosmerný motor 18V pre nabíjateľný elektrický pílový skrutkovač8,54 €BEZPLATNÉ doručenie

21V RS550 motor kartá?ovaný motor 14 zubov10,22 €BEZPLATNÉ doručenie

DC21V 8-zubový motor RS-550VD H3 pre WORX 50027484 WU390 WX390 WX390.120,90 €BEZPLATNÉ doručenie

Would you like us to let you know when it's back?

Pridať do košíka

Popis a podrobnosti

Zhrnutie

[Operating Steps] Method 1: This ferrule puller for disassembling sleeve only - Place the sleeve between the red notched end of the tool (notch clamps the sleeve). Method 2: Remove the compression nut and sleeve - Place the red notched end of the compression sleeve puller behind the compression nut. Ensure the compression sleeve puller aligns correctly with the pipe, then rotate the handle approximately 10-15 turns to remove the nut and sleeve.
[Save Time] This compression sleeve puller tool is easy to use in relatively tight spaces and restores previously crimped copper pipes to a perfect circular shape. It won't damage the copper material. Making the removal of sleeves easy, it simplifies pipe work.
[Wear-Resistant] Even if existing valves are severely corroded or freeze, you can rotate the lever to remove the old compression sleeve from the pipe. Ensure the compression ring removal tool aligns correctly with the pipe,then rotate the compression fitting removal tool handle approximately 10-15 turns to remove the nut and sleeve. Easily and quickly address the issue of compression valves failing due to minor leaks.
[No Damage to Walls, Copper] This compression ring puller tool can remove leaking compression sleeves without damaging walls, allowing for easy removal of nuts and sleeves from the pipes. The ferrule removal tool is designed to dismantle 1/2-inch copper water compression sleeves.
Remove Ferrule

Compression Puller Tool Remove Ferrule,Ferrule Puller for 1/2In Copper Water Compression Sleeve 1/2In Copper Tubing Popis

[Operating Steps] Method 1: This ferrule puller for disassembling sleeve only - Place the sleeve between the red notched end of the tool ( clamps the sleeve). Method 2: Remove the compression nut and sleeve - Place the red notched end of the compression sleeve puller behind the compression nut. Ensure the compression sleeve puller aligns correctly with the pipe, then rotate the handle approximately 10-15 turns to remove the nut and sleeve.
[Save ] This compression sleeve puller tool is easy to use in relatively tight spaces and restores previously crimped copper pipes to a perfect circular shape. It won't damage the copper material. Making the removal of sleeves easy, it simplifies pipe work.
[Wear-Resistant] Even if existing valves are severely corroded or freeze, you can rotate the lever to remove the old compression sleeve from the pipe. Ensure the compression removal tool aligns correctly with the pipe,then rotate the compression fitting removal tool handle approximately 10-15 turns to remove the nut and sleeve. Easily and quickly address the issue of compression valves failing due to minor leaks.
[No Damage to Walls, Copper] This compression puller tool can remove leaking compression sleeves without damaging walls, allowing for easy removal of nuts and sleeves from the pipes. The ferrule removal tool is designed to dismantle 1/2-inch copper water compression sleeves.

Please note:the physical slightly color difference or difference, does not affect the use, please do not mind, thank you!
Colour:Red
Material:Metal

Package Contents:
1 * compression puller tool

Podrobnosti