Flocking Kit Static Grass Applicator ABS Flocking Machine with Antislip Handle for DIY Scenic Modelling Sand Table

Flocking Kit Static Grass Applicator ABS Flocking Machine with Antislip Handle for DIY Scenic Modelling Sand Table Popis

1. Load the battery before use and check whether the wires in the container have contact with the metal mesh, which is the key inspection step
2. Put in the grass powder. It is suggested that the length of the grass powder is more than 5mm, which is more effective.Then tighten the lid.
3. In the target model and the ground table, white latex is drawn and applied evenly, ready to start sprinkling grass powder
4. Press the surface of the target platform with the negative electrode electrical connector, as close as possible, and then use the grass planter to start spraying the grass powder 2-3cm away from the target platform.
5. After the grass powder is finished, pour out the extra grass powder or use a model vacuum cleaner to suck it .Trim the haystack with small scissors and a toothpick until it grows evenly.

colour: black
Material: metal

Package Contents:
1 x flocking machine (without 2 x 1.5V batteries)
1 x small diameter net cover
1 x large-diameter net cover
1 bag x grass
1 x brush
1 x planting template tool