Obrázky produktu
Sorry, this item is temporarily out of stock.
FPGA Development Board Open Source RISC-V Linux Lattice ECP5 ULX3S Open Source Toolchain Base Plate + Module - V7.0
New
Would you like us to let you know when it's back?
Popis a podrobnosti
Zhrnutie
- The module uses a GD25Q16 Flash chip, which has write protection preventing bitstream programming to the Flash chip.
- Programming to the FPGA's internal SRAM is possible.
- The simplest solution is to replace the Flash chip with a W25Qxx series chip, such as the W25Q128.
- This issue has been resolved via software; manual soldering is not required.
- The board is primarily developed using an open-source toolchain under Linux, and the official Lattice IDE software for Windows does not support this programmer. Programming can be done using other tools under Windows.
FPGA Development Board Open Source RISC-V Linux Lattice ECP5 ULX3S Open Source Toolchain Base Plate + Module - V7.0 Popis
The module uses a GD25Q16 Flash chip, which has write protection preventing bitstream programming to the Flash chip.
Programming to the FPGA's internal is possible.
The simplest solution is to replace the Flash chip with a W25Qxx series chip, such as the W25Q128.
This issue has been resolved via software; manual soldering is not required.
The board is primarily developed using an open-source toolchain under Linux, and the official Lattice IDE software for Windows does not support this programmer. Programming can be done using other tools under Windows.
Differences between v6.0 and v7.0: There are no differences in the pinout. Special Notes:
Color: Green
Material: PCB
Package Contents:
1*Development Board(Base plate + module - v7.0)
Podrobnosti
| OPC | PXYHXT8 |
|---|---|
| Kódy | 6033710480781 (EAN) |
| Informácie o produkte a bezpečnosti |
Údaje o produkte
| Height | 2cm |
|---|---|
| Width | 5cm |
| Length | 10cm |
| Weight | 0.082kg |
| Colour | Green |
| Material | PCB |