Obrázky produktu
IIC I2C TB6612 Motor/Stepper/Servo Shield V2 Stepper Motor PWM Servo Driver Module for
Značka Typecat
Nové
Na sklade
Prečo si zamilujete nakupovanie na OnBuy:
- Získajte cashback pri každom nákupe – použite ho okamžite na ďalšiu objednávku
- Doprava zadarmo – na milióny produktov na celej stránke
- Zákazníci nás milujú – 134,000 hodnotení s “Vynikajúcim” hodnotením
21,25 €
28,33 €
25 % zľava!
BEZPLATNÉ doručenie
1%
Čo je okamžitý Cashback?
Zistiť viac
Ceny produktov predávaných spoločnosťou OnBuy sú uvedené s DPH.
Zobraziť celý popis a podrobnosti o produkte
Doručenie: Štandard (Zadarmo) | pia 2 - str 7 okt
Predáva: Papishop
Vrátenie tovaru: 30 dní
180-dňová ochrana platieb
Mohlo by sa vám tiež páčiť
Popis a podrobnosti
Zhrnutie
- for The Arduino interface is fully compatible with extensions. for Arduino communication via 12C and addresses can be modified. It can take two motors with direct PWM drive output. Up to four DC brush motors or two four-wire stepper motors can be connected.
- Using TB6612FNG motor driver chip, 1.2A drive capability, 3.2A peak, peak L298N module.
- TB6612MOSFET driver: 1.2A and 3A peak current per channel. it also has a lower motor voltage drop, so more torque can be obtained from the battery. Instead of using latches and FOR Arduinos PWM pins, we have a fully dedicated PWM driver on the chip. This chip handles all the motor and speed control on the 12C. Only two pins (SDA and SCL) are needed to drive multiple motors. Stackable design.
- Servo Shield v2 Driver
- DC Stepper Motor Driver Module
IIC I2C TB6612 Motor/Stepper/Servo Shield V2 Stepper Motor PWM Servo Driver Module for Popis
for The interface is fully compatible with extensions. for communication via 12C and addresses can be modified. It can take two motors with direct PWM drive output. to four brush motors or two four-wire stepper motors can be connected.
Using TB6612FNG motor driver chip, 1.2A drive capability, 3.2A , L298N module.
TB6612MOSFET driver: 1.2A and 3A current per channel. it also has a lower motor voltage drop, so more torque can be obtained from the battery. Instead of using latches and FOR Arduinos PWM pins, we have a fully dedicated PWM driver the chip. This chip handles all the motor and speed control the 12C. Only two pins (SDA and SCL) are needed to drive multiple motors. Stackable design.
Supply Voltage: 8-35V
Logic Voltage: 5~12V
Reference Voltage: 5.5V
Output -Resistance: 320-430m ohms per driver
Diode Forward Voltage: 1.2V per driver
Output Current of the Driver: 2A
for Compatible: Yes
Product Dimensions: 6.8x5.2cm
Color: As Shown
Material: PCB
Package Contents:
1 * TB6612 Stepper Motor Driver Module
Podrobnosti
| OPC | PVP6WWZ |
|---|---|
| Značka | Typecat |
| Kódy | 4713390959365 (EAN) |
| Informácie o produkte a bezpečnosti |
Údaje o produkte
| Height | 2cm |
|---|---|
| Width | 6cm |
| Length | 7cm |
| Weight | 0.0205kg |
| Colour | As Shown |
| Material | PCB |
Porovnajte predajcov pre IIC I2C TB6612 Motor/Stepper/Servo Shield V2 Stepper Motor PWM Servo Driver Module for
- Nové od 21,25 €
| Predajca | Recenzie | Záruka | Vrátenie tovaru | Cena | Doručenie | Celkom | Množstvo |
|---|---|---|---|---|---|---|---|
|
Odoslané z:
|
(436 recenzií) | - |
30 dní
Bezplatné vrátenie tovaru Nie
|
21,25 €
|
+Free Delivery
Odhadované doručenie:
2-7 okt
|
21,25 €
|
Zarábajte pri nakupovaní s okamžitým Cashback na všetko.
Žiadny háčik, žiadne náklady
- Pripísané na váš OnBuy účet
- Použite ho na váš ďalší nákup
- Ušetrite alebo si vyberajte
Staňte sa Cashback VIP
Už 1 nákup odomkne lepšie ponuky a zľavy