Obrázky produktu
JYQD-V8.8B Bldc Driver Board Speed Controller AC110V/220V for Sensorless Brushless Motor, Motor Driver Board
Nové
Na sklade
Prečo si zamilujete nakupovanie na OnBuy:
- Získajte cashback pri každom nákupe – použite ho okamžite na ďalšiu objednávku
- Doprava zadarmo – na milióny produktov na celej stránke
- Zákazníci nás milujú – 132,000 hodnotení s “Vynikajúcim” hodnotením
27,40 €
45,21 €
39 % zľava!
+9,45 € doručenie
1%
Čo je okamžitý Cashback?
Zistiť viac
Ceny produktov predávaných spoločnosťou OnBuy sú uvedené s DPH.
Zobraziť celý popis a podrobnosti o produkte
Doručenie: Štandard (9,45 €) | uto 8 - pon 14 sep
Predáva: CollBea
Vrátenie tovaru: 30 dní
180-dňová ochrana platieb
Mohlo by sa vám tiež páčiť
Popis a podrobnosti
Zhrnutie
- 1. Confirm that the voltage and power parameters of the motor not exceed the range of the driver board as specified.
- 2. This driver board is used for 3-phase brushless sensorless motor, but not suit for all 3-phase brushless sensorless motors directly. If the driving effect is not good Customers can adjust the resistance and capacitance of the driver board according to the actual situation to achieve the best driving effect
- 3. JYQD-V8.8 driver board is bare board without housing and heatsink. If the power of the motor below 60W ,it does not need to add heatsink, It only needs to ensure normal ventilation and well insulation. If the power of the motor more than 60W, it must add heatsink like the diagram as below.
- 4. The 5V output port on the driver board prohibits connect external device. It is only applicable to the external potentiometer and switch of the board for speed regulation and reversal.
- 5. The "M" terminal on the JYQD-V8.8 driver board is the motor speed pulse output signal (push-pull output), and the maximum output current is less than 5mA.
JYQD-V8.8B Bldc Driver Board Speed Controller AC110V/220V for Sensorless Brushless Motor, Motor Driver Board Popis
1. Confirm that the voltage and power parameters of the motor not exceed the range of the driver board as specified.
2. This driver board is used for 3-phase brushless sensorless motor, but not suit for all 3-phase brushless sensorless motors directly. If the driving effect is not good Customers can adjust the resistance and capacitance of the driver board according to the actual situation to achieve the best driving effect
3. JYQD-V8.8 driver board is bare board without housing and heatsink. If the power of the motor below 60W ,it does not need to add heatsink, It only needs to ensure normal ventilation and well insulation. If the power of the motor more than 60W, it must add heatsink like the diagram as below.
4. The 5V output port the driver board prohibits connect external device. It is only applicable to the external potentiometer and of the board for speed regulation and reversal.
5. The "M" terminal the JYQD-V8.8 driver board is the motor speed pulse output signal (push-pull output), and the maximum output current is less than 5mA.
Color:
Material: Metal+Plastic
Package Contents:
1* bldc driver board
Podrobnosti
| OPC | PRSBYSG |
|---|---|
| Kódy | 4712257229368 (EAN) |
| Informácie o produkte a bezpečnosti |
Údaje o produkte
| Height | 5cm |
|---|---|
| Width | 20cm |
| Length | 15cm |
| Weight | 0.15kg |
| Colour | Blue |
| Material | Metal+Plastic |
Porovnajte predajcov pre JYQD-V8.8B Bldc Driver Board Speed Controller AC110V/220V for Sensorless Brushless Motor, Motor Driver Board
- Nové od 36,85 €
| Predajca | Recenzie | Záruka | Vrátenie tovaru | Cena | Doručenie | Celkom | Množstvo |
|---|---|---|---|---|---|---|---|
|
Odoslané z:
|
(206 recenzií) | - |
30 dní
Bezplatné vrátenie tovaru Nie
|
27,40 €
|
+9,45 € Delivery
Odhadované doručenie:
8-14 sep
|
36,85 €
|
Zarábajte pri nakupovaní s okamžitým Cashback na všetko.
Žiadny háčik, žiadne náklady
- Pripísané na váš OnBuy účet
- Použite ho na váš ďalší nákup
- Ušetrite alebo si vyberajte
Staňte sa Cashback VIP
Už 1 nákup odomkne lepšie ponuky a zľavy