Miniature Scene Model Materia Flocking Static Grass Applicator 2.0 Modeling Hobby Accessory
Na sklade
Prečo si zamilujete nakupovanie na OnBuy:
- Získajte cashback pri každom nákupe – použite ho okamžite na ďalšiu objednávku
- Doprava zadarmo – na milióny produktov na celej stránke
- Zákazníci nás milujú – 127,000 hodnotení s “Vynikajúcim” hodnotením
Ceny produktov predávaných spoločnosťou OnBuy sú uvedené s DPH.
K dispozícii sú aj bezúročné možnosti platby
Zobraziť celý popis a podrobnosti o produkte
Doručenie: Štandard (6,68 €) | pon 29 jún - sob 4 júl
Vrátenie tovaru: 30 dní
180-dňová ochrana platieb
Najobľúbenejšie v Nástroje na modelovanie
Zhrnutie
- 1. Load the battery before use and check whether the wires in the container have contact with the metal mesh, which is the key inspection step;
- 2. Put in the grass powder. It is suggested that the length of the grass powder is more than 5mm, which is more effective.Then tighten the lid.
- 3. In the target model and on the ground table, white latex is drawn and applied evenly, ready to start sprinkling grass powder;
- 4. Press the surface of the target platform with the negative electrode electrical connector, as close as possible, and then use the grass planter to start spraying the grass powder 2-3cm away from the target platform.
- 5. After the grass powder is finished, pour out the extra grass powder or use a model vacuum cleaner to suck it up.Trim the haystack with small scissors and a toothpick until it grows evenly.
Miniature Scene Model Materia Flocking Static Grass Applicator 2.0 Modeling Hobby Accessory Popis
1. Load the battery before use and check whether the wires in the container have contact with the metal mesh, which is the key inspection step;
2. Put in the grass powder. It is suggested that the length of the grass powder is more than 5mm, which is more effective.Then tighten the lid.
3. In the target model and the ground table, white latex is drawn and applied evenly, ready to start sprinkling grass powder;
4. Press the surface of the target platform with the negative electrode electrical connector, as close as possible, and then use the grass planter to start spraying the grass powder 2-3cm away from the target platform.
5. After the grass powder is finished, pour out the extra grass powder or use a model vacuum cleaner to suck it .Trim the haystack with small scissors and a toothpick until it grows evenly.
Material:plastic
colour:black
Package Contents:
1 x Flocking Machine(Without battery)
1 x Net
1 Pack x Grass
1 x brush
1 x Planting Template Tool
Podrobnosti
| OPC | PV96Y56 |
|---|---|
| Kódy | 6034215265705 (EAN) |
Údaje o produkte
| Height | 12cm |
|---|---|
| Width | 12cm |
| Length | 30cm |
| Weight | 0.296kg |
| Colour | black |
| Material | plastic |
Porovnajte predajcov pre Miniature Scene Model Materia Flocking Static Grass Applicator 2.0 Modeling Hobby Accessory
- Nové od 39,37 €
| Predajca | Recenzie | Záruka | Vrátenie tovaru | Cena | Doručenie | Celkom | Množstvo |
|---|---|---|---|---|---|---|---|
|
Odoslané z:
|
(139 recenzií) | - |
30 dní
Bezplatné vrátenie tovaru Nie
|
32,69 €
|
+6,68 € Delivery
Odhadované doručenie:
29 jún - 4 júl
|
39,37 €
|
Zarábajte pri nakupovaní s okamžitým Cashback na všetko.
Žiadny háčik, žiadne náklady
- Pripísané na váš OnBuy účet
- Použite ho na váš ďalší nákup
- Ušetrite alebo si vyberajte
Staňte sa Cashback VIP
Už 1 nákup odomkne lepšie ponuky a zľavy