Obrázky produktu
MKS Robin V3.1 for 3D Printer Control Board 32Bit Motherboard Support Marlin2.0 Support TFT M4 Core
Značka Tlily
Nové
Na sklade
Prečo si zamilujete nakupovanie na OnBuy:
- Získajte cashback pri každom nákupe – použite ho okamžite na ďalšiu objednávku
- Doprava zadarmo – na milióny produktov na celej stránke
- Zákazníci nás milujú – 132,000 hodnotení s “Vynikajúcim” hodnotením
47,42 €
80,45 €
41 % zľava!
BEZPLATNÉ doručenie
1%
Čo je okamžitý Cashback?
Zistiť viac
Ceny produktov predávaných spoločnosťou OnBuy sú uvedené s DPH.
Zobraziť celý popis a podrobnosti o produkte
Doručenie: Priorita (Zadarmo) | štv 27 aug - str 2 sep
Predáva: CNNOTEPAD
Vrátenie tovaru: 30 dní
180-dňová ochrana platieb
Mohlo by sa vám tiež páčiť
Popis a podrobnosti
Zhrnutie
- for Robin Nano V3.1 is an upgraded version of Robin Nano V3.0, with the MCU changed from STM32F407VGT6 to STM32F407VET6. More importantly, Robin NanoV3.1 has improved its anti-interference performance, such as adding Schottky diodes in temperature measurement circuits and MOS circuits, and adding TVS protection at the power input terminal.
- Similar to Robin Nano V2.0, the firmware of MKS Robin Nano V3.1 is also based on Marlin 2. X. In fact,
- WIFI module adds SPI connection,SPI speed is much higher than serial communication (currently released firmware still only supports serial communication, and the SPI communication version will be updated soon)
- Support dual Z-axis,Parallel to the Z-axis motor interface, dual Z-axes can also be used when using dual extruders
- 3D Printer TFT Board
MKS Robin V3.1 for 3D Printer Control Board 32Bit Motherboard Support Marlin2.0 Support TFT M4 Core Popis
for Robin V3.1 is an upgraded version of Robin V3.0, with the MCU changed from STM32F407VGT6 to STM32F407VET6. More importantly, Robin NanoV3.1 has improved its anti-interference performance, such as adding Schottky diodes in temperature measurement circuits and MOS circuits, and adding TVS protection at the power input terminal.
Similar to Robin V2.0, the firmware of MKS Robin V3.1 is also based Marlin 2. X. In fact,
WIFI module adds SPI connection,SPI speed is much higher than serial communication (currently released firmware still only supports serial communication, and the SPI communication version will be updated soon)
Support dual Z-axis,Parallel to the Z-axis motor interface, dual Z-axes can also be used when using dual extruders
Hign-concerned Chemical:None
Model Number:MKS Robin V3.1
Item Type:Motherboard
Colour:As Shown
Material:PCB
Package Contents:
1 * Motherboard
1 pack * accessories
Podrobnosti
| OPC | PVKNF6Z |
|---|---|
| Značka | Tlily |
| Kódy | 4714092732027 (EAN) |
| Informácie o produkte a bezpečnosti |
Údaje o produkte
| Height | 4cm |
|---|---|
| Width | 15cm |
| Length | 17cm |
| Weight | 0.14kg |
| Colour | As Shown |
| Material | PCB |
Porovnajte predajcov pre MKS Robin V3.1 for 3D Printer Control Board 32Bit Motherboard Support Marlin2.0 Support TFT M4 Core
- Nové od 47,42 €
| Predajca | Recenzie | Záruka | Vrátenie tovaru | Cena | Doručenie | Celkom | Množstvo |
|---|---|---|---|---|---|---|---|
|
Odoslané z:
|
(466 recenzií) | - |
30 dní
Bezplatné vrátenie tovaru Nie
|
47,42 €
|
+Free Priority Delivery
Odhadované doručenie:
27 aug - 2 sep
|
47,42 €
|
Zarábajte pri nakupovaní s okamžitým Cashback na všetko.
Žiadny háčik, žiadne náklady
- Pripísané na váš OnBuy účet
- Použite ho na váš ďalší nákup
- Ušetrite alebo si vyberajte
Staňte sa Cashback VIP
Už 1 nákup odomkne lepšie ponuky a zľavy