RP2350-LCD-0.96 Development Board with 0.96inch LCD Display 160x80 Resolution Based RP2350A Microcontroller,Soldered

RP2350-LCD-0.96 Development Board with 0.96inch LCD Display 160x80 Resolution Based RP2350A Microcontroller,Soldered Popis

RP2350-LCD-0.96 is a low-cost, high-performance -like MCU board with flexible digital interfaces. It incorporates for Raspberry Pi's RP2350A microcontroller chip, the same as the one for Raspberry Pi 2.
Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running to 150 MHz.
520KB of , and 4MB of -board Flash memory.
USB-C connector, keeps it to date, easier to use.
0.96inch 160x80 pixels 65K colorful IPS LCD display.

Lithium battery recharge/discharge header, suitable for mobile devices.
Onboard - chip MP28164, high efficiency - buck-boost chip, maximum 2A load current.
Castellated module allows soldering directly to carrier boards.
USB 1.1 with device and host support.
Low-power sleep and dormant modes.
Drag-and-drop programming using mass storage over USB.
26 x multi-function GPIO pins.
2 x SPI, 2 x I2C, 2 x UART, 4 x 12-bit ADC, 16 x controllable PWM channels.
Accurate clock and timer -chip.
Temperature sensor.
Accelerated floating-point libraries -chip.
12 x Programmable I/O (PIO) state machines for custom peripheral support.
Note:Due to different production batches, there are differences in printing/appearance, which does not affect the use.
Type:Soldered
Colour:
Material:PCB

Package Contents:
1 * Development Board