Tang 20K FPGA Development Board RISCV Linux for Retro Game Player
Na sklade
Prečo si zamilujete nakupovanie na OnBuy:
- Získajte cashback pri každom nákupe – použite ho okamžite na ďalšiu objednávku
- Doprava zadarmo – na milióny produktov na celej stránke
- Zákazníci nás milujú – 128,000 hodnotení s “Vynikajúcim” hodnotením
Ceny produktov predávaných spoločnosťou OnBuy sú uvedené s DPH.
K dispozícii sú aj bezúročné možnosti platby
Zobraziť celý popis a podrobnosti o produkte
Doručenie: Priorita (2,00 €) | štv 9 - sob 11 júl
Predáva: WuLinshop
Vrátenie tovaru: 30 dní
180-dňová ochrana platieb
Najobľúbenejšie v Dosky plošných spojov
Zhrnutie
- Tang Nano 20K is a core board using GOWIN Semiconductor GW2AR-18 QN88. The chip has 20736 logical lookup tables (LUT4) and 15552 registers (FF). There are two PLLs inside and multiple DSP units. Supports 18-bit x 18-bit multiplication to speed up number operations.
- It has built-in low-latency 64Mbits SDRAM, making it easier to run the NES emulator and better able to run soft-core Linux systems.
- The onboard BL616 chip serves as the FPGA JTAG downloader and serial port for communication with the FPGA.
- The board uses a 27MHz crystal oscillator by default to multiply the clock required for HDMI-compatible display, and is also equipped with an MS5351 clock generation chip to generate a variety of required clocks at will.
- The onboard download chip has been upgraded to a USB2.0 HS interface, with the functions of high-speed JTAG download, serial communication, high-speed SPI reception, and precise clock configuration.
Tang 20K FPGA Development Board RISCV Linux for Retro Game Player Popis
Tang 20K is a core board using GOWIN Semiconductor GW2AR-18 QN88. The chip has 20736 logical lookup tables (LUT4) and 15552 registers (FF). There are two PLLs inside and multiple DSP units. Supports 18-bit x 18-bit multiplication to speed number operations.
It has built-in low-latency 64Mbits SDRAM, making it easier to run the NES emulator and better able to run soft-core Linux systems.
The onboard BL616 chip serves as the FPGA JTAG downloader and serial port for communication with the FPGA.
The board uses a 27MHz crystal oscillator by default to multiply the clock required for -compatible display, and is also equipped with an MS5351 clock generation chip to generate a variety of required clocks at will.
The onboard download chip has been upgraded to a USB2.0 HS interface, with the functions of high-speed JTAG download, serial communication, high-speed SPI reception, and precise clock configuration.
color:black
Material:PCB+electronic components
Package Contents:
1 x Tang 20K Core Board
1 x data cable
2 x PIN
Podrobnosti
| OPC | PVHGF25 |
|---|---|
| Značka | Melitt |
| Kódy | 4712984438910 (EAN) |
Údaje o produkte
| Height | 2cm |
|---|---|
| Width | 6cm |
| Length | 8cm |
| Weight | 0.0445kg |
| Colour | black |
| Material | PCB+electronic components |
Porovnajte predajcov pre Tang 20K FPGA Development Board RISCV Linux for Retro Game Player
- Nové od 50,28 €
| Predajca | Recenzie | Záruka | Vrátenie tovaru | Cena | Doručenie | Celkom | Množstvo |
|---|---|---|---|---|---|---|---|
|
Odoslané z:
|
(159 recenzií) | - |
30 dní
Bezplatné vrátenie tovaru Nie
|
48,28 €
|
+2,00 € Delivery
Odhadované doručenie:
9-11 júl
|
50,28 €
|
Zarábajte pri nakupovaní s okamžitým Cashback na všetko.
Žiadny háčik, žiadne náklady
- Pripísané na váš OnBuy účet
- Použite ho na váš ďalší nákup
- Ušetrite alebo si vyberajte
Staňte sa Cashback VIP
Už 1 nákup odomkne lepšie ponuky a zľavy