Sorry, this item is temporarily out of stock.

TMC2226 Stepper Motor Driver Ultra-Quiet High-Current UART Mode 3D Printer Parts

New

Podobné produkty, ktoré by sa vám mohli páčiť

Testovacia adaptérová karta pre pamäťové karty Memory Stick Testovacia adaptérová karta pre pamäťové karty v notebooku7,92 €BEZPLATNÉ doručenie

Pamäť RAM DDR4 3200MHz 16GB Herná pamäť pre stolné počítače PC4-25600 PC4-19200 17000 288Pin DIMM144,74 €BEZPLATNÉ doručenie

CORSAIR Vengeance RGB PRO - DDR4 - 256 GB: 8 x 32 GB - DIMM 288-PIN - ungepuffert827,88 €BEZPLATNÉ doručenie

Pamäť RAM DDR4 3200MHz 16GB Herná pamäť pre stolné počítače145,54 €BEZPLATNÉ doručenie

2x 2GB DDR2 PC2-6400 800MHz 200Pin 1.8V pamäť pre notebooky SO-DIMM28,75 €BEZPLATNÉ doručenie

Testovacia adaptérová karta pre pamäťové karty Memory Stick Testovacia adaptérová karta pre pamäťové karty v notebooku7,92 €BEZPLATNÉ doručenie

Pamäť RAM DDR4 3200MHz 16GB Herná pamäť pre stolné počítače PC4-25600 PC4-19200 17000 288Pin DIMM144,74 €BEZPLATNÉ doručenie

CORSAIR Vengeance RGB PRO - DDR4 - 256 GB: 8 x 32 GB - DIMM 288-PIN - ungepuffert827,88 €BEZPLATNÉ doručenie

Would you like us to let you know when it's back?

Pridať do košíka

Popis a podrobnosti

Zhrnutie

The TMC2226 possesses all the features of the TMC2209 and serves as a direct replacement. It utilizes an HTSSOP package, offering superior heat dissipation at the same current levels; it generates less heat, supports higher currents, and enables sensorless homing.
Ultra-quiet operation
Large heatsink for excellent thermal performance
Supports sensorless homing
UART mode is enabled via jumper caps, eliminating the need for soldering on boards such as the MKS SGEN_L, MKS GEN L, MKS Robin E3D, and MKS Robin Nano V3.

TMC2226 Stepper Motor Driver Ultra-Quiet High-Current UART Mode 3D Printer Parts Popis

The TMC2226 possesses all the features of the TMC2209 and serves as a direct replacement. It utilizes an HTSSOP package, offering superior heat dissipation at the same current levels; it generates less heat, supports higher currents, and enables sensorless homing.
Ultra-quiet operation
Large heatsink for excellent thermal performance
Supports sensorless homing
UART mode is enabled via jumper caps, eliminating the need for soldering boards such as the MKS SGEN_L, MKS GEN L, MKS Robin E3D, and MKS Robin V3.

Drive Current Adjustment
1. Measure the voltage between GND and the potentiometer's center pin (Vref).
2. Do not connect the motor while measuring the voltage; doing so risks burning out the driver.
3. Connect the main power supply when measuring the voltage; do not rely solely USB power.
4. Pay close attention to orientation; do not plug it in backwards.
Color: As Shown
Material: PCB

Package Contents:
1*TMC2226 Stepper Motor Driver