1 Channel Trigger Cycle Timing MOS Module Non-Relay Infinite Start-Stop Times Timing Trigger Controller

1 Channel Trigger Cycle Timing MOS Module Non-Relay Infinite Start-Stop Times Timing Trigger Controller Popis

I. Triggering behavior: Starts upon a trigger signal and stops after *x* seconds. If triggered again while running, it does not stop immediately but resets the timer to *x* seconds before stopping.


II. settings:
1. parameters X and Y can be adjusted by the customer using a "controller" (sold separately).
2. The adjustable delay range is from 0.01 seconds to 9999 minutes.
3. Set times (X and Y) are saved even after power loss.
4. Default setting upon shipment is 1 second.
5. Without the "controller," the cannot be adjusted after receipt.
III. Trigger signal input port:
1. Supports push-button triggers and dry-contact triggers (similar to push-buttons);
Does not support voltage-level triggers or analog signal triggers.
2. Group A function modes do not require a trigger signal; the trigger port is inactive and should not be wired.
IV. Output port:
1. The output port uses a MOSFET to control the negative terminal.
2. The positive terminal of the output port remains constantly energized (positive potential).
3. There is a voltage drop of a fraction of a volt at the output port.
Color: As Shown
Material: Plastic+Metal

Package Contents:
1*Module