Tržiště s Cashback Okamžitý výdělek na všechno Doprava zdarma na milionech produktů Vysoce hodnocené Vynikající hodnocení na Trustpilotu Staňte se VIP členem Cashback Vyšší sazby, lepší nabídky 30denní možnost vrácení zboží Plus ochrana nákupu

Omlouváme se, tato položka je dočasně vyprodaná.

2X P1P/P1S Hotend 0.6mm Ceramic Assembled Extruder Printhead Kit for P1P/P1S- 3D Printer Hot End Replacement

Nové

848,39 Kč

Podobné produkty, které by se vám mohly líbit

Diamantové čepele

Chcete, abychom vám dali vědět, až bude zpět?

Přidat do košíku

Popis a podrobnosti

Shrnutí

High Quality 3D Printer Accessories: Includes assembled bambu hotend p1s hot end kit parts: heat sink block, high precision 0.6mm nozzle, connectors, throat tube heatbreak, heater block, silicone sock, cartridge heater and thermistor for smoother printing and better 3D printed models.
Support High Speed Printing: Semi-assembled P1P/P1S 0.6mm hotend hot end with all-metal throat and cartridge heater design makes the print head heated evenly and the filament flows smoothly in the throat nozzle to support high speed printing. And produced by a rigorous design and testing team, no leakage and clogging.
Material Advantages: The 0.6mm hardened steel nozzle, through heat treatment or alloying processes, enhances its hardness, resulting in a wear resistance that is 2-7 times greater than that of ordinary steel nozzles.
Hardened Steel Nozzle: The maximum working temperature of hardened steel nozzle can reach 500-650 ℃, much higher than stainless steel (350 ℃) and brass (300 ℃), and supports printing of high-temperature filaments, such as PEEK and PEI.
Warm Note: We kindly suggest you please check whether each part is tightened before use, because the assembled 0.6mm P1P/P1S hotend kit will be loosened during transportation. Then after installing this hotend print head kit, we suggest you to re-level the heat bed.

2X P1P/P1S Hotend 0.6mm Ceramic Assembled Extruder Printhead Kit for P1P/P1S- 3D Printer Hot End Replacement Popis

High Quality 3D Printer Accessories: Includes assembled bambu hotend p1s hot end kit parts: heat sink block, high precision 0.6mm nozzle, connectors, throat tube heatbreak, heater block, silicone sock, cartridge heater and thermistor for smoother printing and better 3D printed models.
Support High Speed Printing: Semi-assembled P1P/P1S 0.6mm hotend hot end with all-metal throat and cartridge heater design makes the print heated evenly and the filament flows smoothly in the throat nozzle to support high speed printing. And produced by a rigorous design and testing team, no leakage and clogging.
Material Advantages: The 0.6mm hardened steel nozzle, through heat treatment or alloying processes, enhances its hardness, resulting in a wear resistance that is 2-7 times greater than that of ordinary steel nozzles.
Hardened Steel Nozzle: The maximum working temperature of hardened steel nozzle can reach 500-650 , much higher than stainless steel (350 ) and brass (300 ), and supports printing of high-temperature filaments, such as PEEK and PEI.
Warm Note: We kindly suggest you please check whether each part is tightened before use, because the assembled 0.6mm P1P/P1S hotend kit will be loosened during transportation. Then after installing this hotend print kit, we suggest you to re-level the heat bed.

Color: As Shown
Material: Metal

Package Contents:
2 x P1P Hotend Kit

Podrobnosti