3X DSP Emulator Programmer XDS100 XDS100V2 JTAG Debugger Suitable for TI ARM9 A8 TMS320 TI DSP CCS5-CCS10
Skladem
Proč si zamilujete nakupování na OnBuy:
- Získejte Cashback při každém nákupu – využijte jej okamžitě při další objednávce
- Doprava zdarma – u milionů položek na celém webu
- Zákazníci nás mají rádi – 133,000 recenzí s hodnocením “Vynikající”
Ceny zboží prodávaného na OnBuy jsou zobrazeny včetně DPH.
Možnosti platby bez úroků k dispozici
Zobrazit kompletní popis a podrobnosti o produktu
Doručení: Standardní (Zdarma) | čtv 10 - sob 12 zář
Vrácení zboží: 30 dní
180denní ochrana platby
Mohlo by se vám také líbit
Shrnutí
- The XDS100v2 emulator is the second version of the XDS100 JTAG emulation technology and supports various chip debugging for TI.
- Support USB2.0 high-speed interface, theoretical speed up to 480M/s, through the 14PIN interface for simulation debugging,
- Code Composer Studio (CCS) V4, V5,V6,V7,V8,V9,V10 and later is supported.
- It can be used in Windows 2000, XP, Vista, WIN7/8, WIN10 and other operating systems.
- The XDS100V2, which follows the official scheme, has the same performance in terms of speed and compatibility. The supported devices are the same.
3X DSP Emulator Programmer XDS100 XDS100V2 JTAG Debugger Suitable for TI ARM9 A8 TMS320 TI DSP CCS5-CCS10 Popis
The XDS100v2 emulator is the second version of the XDS100 JTAG emulation technology and supports various chip debugging for TI.
Support USB2.0 high-speed interface, theoretical speed to 480M/s, through the 14PIN interface for simulation debugging,
Code Composer Studio (CCS) V4, V5,V6,V7,V8,V9,V10 and later is supported.
It can be used in Windows 2000, XP, Vista, WIN7/8, WIN10 and other operating systems.
The XDS100V2, which follows the official scheme, has the same performance in terms of speed and compatibility. The supported devices are the same.
Features
Support for the following processor cores: TMS320C28x, TMS320C54x, TMS320C55x, TMS320C64x+, TMS320C674x, ARM 9, ARM Cortex R4, and ARM Cortex A8.
Debugging function(connect / disconnect, read / write memory, read the register, load the program, run, stop steps to support the breakpoint debugging, real- mode)
Supports -Chip Flash Programmer(e.g. C2000)
Support targets with 14-pin TI JTAG connector as used by Texas Instruments embedded processors.
Support for USB2.0 High Speed (480 Mbit/s)
Support for Code Composer Studio v4 and newer (Does not support Code Composer Studio v3.3)
Support CCS5.2
Support for power-off test and Adaptive Clock
Support for Windows XP/Vista/Win7
Material: abs
colour: As shown
Package Contents:
3 set x DSP emulator
Podrobnosti
| OPC | PWJ7QMR |
|---|---|
| Značka | Semoic |
| Kódy | 6033474153242 (EAN) |
| Informace o produktu a bezpečnosti |
Produktová data
| Height | 12cm |
|---|---|
| Width | 10cm |
| Length | 18cm |
| Weight | 0.474kg |
| Colour | As Shown |
| Material | Abs |
Porovnejte prodejce pro 3X DSP Emulator Programmer XDS100 XDS100V2 JTAG Debugger Suitable for TI ARM9 A8 TMS320 TI DSP CCS5-CCS10
- Nové od 2 462,18 Kč
| Prodejce | Hodnocení | Záruka | Vrácení zboží | Cena | Doručení | Celkem | Množství |
|---|---|---|---|---|---|---|---|
|
Odesláno z:
|
(245 recenzí) | - |
30 dní
Vrácení zboží zdarma Ne
|
2 462,18 Kč
|
+Free Delivery
Odhadované doručení:
10-12 zář
|
2 462,18 Kč
|
Získávejte odměny při nákupu s okamžitým Cashback na vše.
Žádný háček, žádné náklady
- Připsáno na váš účet OnBuy
- Využijte je při dalším nákupu
- Ušetřete nebo si je vyberte
Staňte se Cashback VIP
Už po 1 nákupu získáte lepší nabídky a ceny