3X DSP Emulator Programmer XDS100 XDS100V2 JTAG Debugger Suitable for TI ARM9 A8 TMS320 TI DSP CCS5-CCS10
På lager
Derfor vil du elske å handle hos OnBuy:
- Tjen Cashback på hvert kjøp – bruk det umiddelbart på din neste bestilling
- Gratis levering – på millioner av varer på hele nettstedet
- Kunder elsker oss – 133,000 anmeldelser med vurderingen “Utmerket”
Prisene for varer solgt av OnBuy inkluderer mva.
Rente- og gebyrfri delbetaling tilgjengelig
Se full produktbeskrivelse og detaljer
Levering: Standard (Gratis) | tor 10. - lør 12. sep
Returer: 30 dager
180 dagers betalingsbeskyttelse
Du vil kanskje også like
Sammendrag
- The XDS100v2 emulator is the second version of the XDS100 JTAG emulation technology and supports various chip debugging for TI.
- Support USB2.0 high-speed interface, theoretical speed up to 480M/s, through the 14PIN interface for simulation debugging,
- Code Composer Studio (CCS) V4, V5,V6,V7,V8,V9,V10 and later is supported.
- It can be used in Windows 2000, XP, Vista, WIN7/8, WIN10 and other operating systems.
- The XDS100V2, which follows the official scheme, has the same performance in terms of speed and compatibility. The supported devices are the same.
3X DSP Emulator Programmer XDS100 XDS100V2 JTAG Debugger Suitable for TI ARM9 A8 TMS320 TI DSP CCS5-CCS10 Beskrivelse
The XDS100v2 emulator is the second version of the XDS100 JTAG emulation technology and supports various chip debugging for TI.
Support USB2.0 high-speed interface, theoretical speed to 480M/s, through the 14PIN interface for simulation debugging,
Code Composer Studio (CCS) V4, V5,V6,V7,V8,V9,V10 and later is supported.
It can be used in Windows 2000, XP, Vista, WIN7/8, WIN10 and other operating systems.
The XDS100V2, which follows the official scheme, has the same performance in terms of speed and compatibility. The supported devices are the same.
Features
Support for the following processor cores: TMS320C28x, TMS320C54x, TMS320C55x, TMS320C64x+, TMS320C674x, ARM 9, ARM Cortex R4, and ARM Cortex A8.
Debugging function(connect / disconnect, read / write memory, read the register, load the program, run, stop steps to support the breakpoint debugging, real- mode)
Supports -Chip Flash Programmer(e.g. C2000)
Support targets with 14-pin TI JTAG connector as used by Texas Instruments embedded processors.
Support for USB2.0 High Speed (480 Mbit/s)
Support for Code Composer Studio v4 and newer (Does not support Code Composer Studio v3.3)
Support CCS5.2
Support for power-off test and Adaptive Clock
Support for Windows XP/Vista/Win7
Material: abs
colour: As shown
Package Contents:
3 set x DSP emulator
Detaljer
| OPC | PWJ7QMR |
|---|---|
| Merke | Semoic |
| Koder | 6033474153242 (EAN) |
| Produkt- og sikkerhetsinformasjon |
Produktdata
| Height | 12cm |
|---|---|
| Width | 10cm |
| Length | 18cm |
| Weight | 0.474kg |
| Colour | As Shown |
| Material | Abs |
Sammenlign selgere for 3X DSP Emulator Programmer XDS100 XDS100V2 JTAG Debugger Suitable for TI ARM9 A8 TMS320 TI DSP CCS5-CCS10
- Ny fra 1 061,05 kr
| Selger | Vurderinger | Garanti | Returer | Pris | Levering | Totalt | Antall |
|---|---|---|---|---|---|---|---|
|
Sendt fra:
|
(245 anmeldelser) | - |
30 dager
Gratis retur Nei
|
1 061,05 kr
|
+Free Delivery
Estimert levering:
10-12 sep
|
1 061,05 kr
|
Tjen mens du handler med umiddelbar Cashback på alt.
Ingen binding, ingen kostnad
- Utbetalt til OnBuy-kontoen din
- Bruk det på neste kjøpet ditt
- Spar den eller ta den ut
Bli en Cashback VIP
Bare 1 kjøp gir deg større rabatter og bedre priser