3X ESP32 Flight Control Open Source Quadcopter ESP-Drone Drone Model Wifi Remote Control Crazyflie RC FPV Racing Drone

3X ESP32 Flight Control Open Source Quadcopter ESP-Drone Drone Model Wifi Remote Control Crazyflie RC FPV Racing Drone Popis

ESP-Drone is an open source drone solution based ESP32/ESP32-S2/ESP32-S3 Wi-Fi chip, which can be controlled over a Wi-Fi network using a mobile APP or gamepad. ESP-Drone supports multiple flight modes, including Stabilize mode, Height-hold mode, and Position-hold mode. With simple hardware, clear and extensible code architecture, ESP-Drone can be used in STEAM education and other fields. The main code is ported from Crazyflie open source project with GPL3.0 protocol.
We had upload the firmware for ESP32-S2-Drone V1.2, you no need to upload firmware, just install the motor and propeller correctly, then you can control the ESP32-S2-Drone with your mobile phone.
Hardware:ESP32-S2-Drone V1.2
Stabilize mode: keep the drone stable to achieve smooth flight.
Height-hold mode: control thrust output to keep the drone flying at a fixed height.

Position-hold mode: keep the drone flying at a fixed position.
PC debugging: use cfclient for static/dynamic debugging.
Controlled by APP: easily controlled over Wi-Fi by your mobile APP.
Controlled by gamepad: easily controlled via the gamepad by cfclient.
Colour:Black
Material:Composite Materials

Package Contents:
3 x Rc Quadcopter Set (Without Lithium Battery)