Tržiště s Cashback Okamžitý výdělek na všechno Doprava zdarma na milionech produktů Vysoce hodnocené Vynikající hodnocení na Trustpilotu Staňte se VIP členem Cashback Vyšší sazby, lepší nabídky 30denní možnost vrácení zboží Plus ochrana nákupu

Sorry, this item is temporarily out of stock.

Audio Module Single 12V to 18V Subwoofer Car Audio Modification Amplifier Isolation Boost Dual Power Module

New

Podobné produkty, které by se vám mohly líbit

Subwoofery do auta

Would you like us to let you know when it's back?

Přidat do košíku

Popis a podrobnosti

Shrnutí

1. With isolation function, the power board test conditions input DC12V, the ±12V output is about 13-14V without load,
2. The ±18V output is about 19V when no load is applied, and will decrease a bit after being loaded.
3. The power amplifier circuit has a certain voltage adaptability range, it doesn't matter how high or low it is, a few volts.
4. If installed in a car, the actual working voltage of the car is about 13.5V, and the output will be higher.
5. This board does not have a voltage stabilizing open-loop circuit, has small ripple, good transient response, high efficiency and low heat generation, and is suitable for power amplifiers.

Audio Module Single 12V to 18V Subwoofer Car Audio Modification Amplifier Isolation Boost Dual Power Module Popis

1. With isolation function, the power board test conditions input DC12V, the 12V output is about 13-14V without load,
2. The 18V output is about 19V when no load is applied, and will decrease a bit after being loaded.
3. The power amplifier circuit has a certain voltage adaptability range, it doesn't matter how high or low it is, a few volts.
4. If installed in a car, the actual working voltage of the car is about 13.5V, and the output will be higher.
5. This board does not have a voltage stabilizing open-loop circuit, has small ripple, good transient response, high efficiency and low heat generation, and is suitable for power amplifiers.

Description:
1.Output power: 200W
2. Input voltage: DC10-15V
3. Output current: 200W/output voltage = output current. That is, the higher the output voltage, the smaller the current.
Specifications: 18V output
Colour:As Shown
Material:PCB
Size:75x70x36mm

Package Contents:
1x Power Amplifier Module
1x 10A Fuse