Audio Module Single 12V to 18V Subwoofer Car Audio Modification Amplifier Isolation Boost Dual Power Module

Audio Module Single 12V to 18V Subwoofer Car Audio Modification Amplifier Isolation Boost Dual Power Module Popis

1. With isolation function, the power board test conditions input DC12V, the 12V output is about 13-14V without load,
2. The 18V output is about 19V when no load is applied, and will decrease a bit after being loaded.
3. The power amplifier circuit has a certain voltage adaptability range, it doesn't matter how high or low it is, a few volts.
4. If installed in a car, the actual working voltage of the car is about 13.5V, and the output will be higher.
5. This board does not have a voltage stabilizing open-loop circuit, has small ripple, good transient response, high efficiency and low heat generation, and is suitable for power amplifiers.

Description:
1.Output power: 200W
2. Input voltage: DC10-15V
3. Output current: 200W/output voltage = output current. That is, the higher the output voltage, the smaller the current.
Specifications: 18V output
Colour:As Shown
Material:PCB
Size:75x70x36mm

Package Contents:
1x Power Amplifier Module
1x 10A Fuse