Obrázky produktu
For FTDI UMFT4222EV-D FTDI FT4222HQ-D USB Hi-Speed MultiC Module
Nové
Skladem
Proč si zamilujete nakupování na OnBuy:
- Získejte Cashback při každém nákupu – využijte jej okamžitě při další objednávce
- Doprava zdarma – u milionů položek na celém webu
- Zákazníci nás mají rádi – 130,000 recenzí s hodnocením “Vynikající”
812,73 Kč
860,32 Kč
Sleva 6 %!
+100,18 Kč za doru en
1%
Získejte 8,13 Kč okamžitě
Zjistěte více
Ceny zboží prodávaného na OnBuy jsou zobrazeny včetně DPH.
Možnosti platby bez úroků k dispozici
Zobrazit kompletní popis a podrobnosti o produktu
Doručení: Standardní (100,18 Kč) | pon 17 - sob 22 srp
Vrácení zboží: 30 dní
180denní ochrana platby
Popis a podrobnosti
Shrnutí
- Single high-speed USB 2.0 chip (FT4222H), a flexible and configurable SPI / I2C interface. Single / Dual / Quad Core SPI master mode SPI interface supports configurable target speed. In SPI mode with up to four data patterns 28Mbps data transfer rate. It supports up to four slave SPI master mode select control pins. SPI slave mode supports single and SCK operating frequency up to 20MHz.
- I2C interface supports seven address, and is fully compatible with 2.1 and v3 specification I2C master / slave mode target run rate of 100Kbit and configuration of / S standard mode to reach the next 400kbit / s fast mode of 1Mbit / s and 3.4Mbit fast mode plus / s high-speed mode. GPIO can be configured via the USB bus controlled by the application software. Fully supports USB2.0 suspend / resume and remote wakeup. Supports battery charger detection.
- OTP memory USB Vendor ID (VID), product ID (PID), serial number, product description strings, and a variety of other vendors specific data. USB power configuration ; bus-powered and self-powered. FT4222H board jumper configuration mode, USB power configuration and VCCIO source selection. Integrated power-on reset circuit. The real driving output 3.3V CMOS and TTL input. (Operating voltage as low as 1.8V and 1.8V external power input to VCCIO) It supports a wide supply voltage range.
- USB2.0 low operating and suspend current; 68 mA (active typ) and 375uA (hang typ). Configurable I / O pin output drive strength: 4 mA (min ) and 16 mA (max); UHCI / OHCI / EHCI / compatible xHCI host controller. Onboard USB mini-B socket allows the module is connected to the PC.
- UMFT4222EV-D Module
For FTDI UMFT4222EV-D FTDI FT4222HQ-D USB Hi-Speed MultiC Module Popis
Single high-speed USB 2.0 chip (FT4222H), a flexible and configurable SPI / I2C interface. Single / Dual / Quad Core SPI master mode SPI interface supports configurable target speed. In SPI mode with to four data patterns 28Mbps data transfer rate. It supports to four slave SPI master mode select control pins. SPI slave mode supports single and SCK operating frequency to 20MHz.
I2C interface supports seven address, and is fully compatible with 2.1 and v3 specification I2C master / slave mode target run rate of 100Kbit and configuration of / S standard mode to reach the next 400kbit / s fast mode of 1Mbit / s and 3.4Mbit fast mode / s high-speed mode. GPIO can be configured via the USB bus controlled by the application software. Fully supports USB2.0 suspend / resume and remote wakeup. Supports battery charger detection.
OTP memory USB Vendor ID (VID), product ID (PID), serial number, product description strings, and a variety of other vendors specific data. USB power configuration ; bus-powered and self-powered. FT4222H board jumper configuration mode, USB power configuration and VCCIO source selection. Integrated power- reset circuit. The real driving output 3.3V CMOS and TTL input. (Operating voltage as low as 1.8V and 1.8V external power input to VCCIO) It supports a wide supply voltage range.
USB2.0 low operating and suspend current; 68 mA (active typ) and 375uA (hang typ). Configurable I / O pin output drive strength: 4 mA (min ) and 16 mA (max); UHCI / OHCI / EHCI / compatible xHCI host controller. Onboard USB -B socket allows the module is connected to the PC.
Product:Development Modules
Type:USB 2.0 to QuadSPI/I2C Bridge
Assessment Tools:FT4222H
Power supply voltage:1.8 V,2.5 V,3.3 V
Features:Development module for the FT4222H Hi-Speed USB2.0 to QuadSPI/I2c bridge
Size:50.65x23.9x1.6 mm
Podrobnosti
| OPC | PWHVYWB |
|---|---|
| Kódy | 6032026016455 (EAN) |
| Informace o produktu a bezpečnosti |
Produktová data
| Height | 2cm |
|---|---|
| Width | 8cm |
| Length | 10cm |
| Weight | 0.012kg |
| Colour | As Shown |
| Material | PC |
Porovnejte prodejce pro For FTDI UMFT4222EV-D FTDI FT4222HQ-D USB Hi-Speed MultiC Module
- Nové od 912,91 Kč
| Prodejce | Hodnocení | Záruka | Vrácení zboží | Cena | Doručení | Celkem | Množství |
|---|---|---|---|---|---|---|---|
|
Odesláno z:
|
(70 recenzí) | - |
30 dní
Vrácení zboží zdarma Ne
|
812,73 Kč
|
+100,18 Kč Delivery
Odhadované doručení:
17-22 srp
|
912,91 Kč
|
Získávejte odměny při nákupu s okamžitým Cashback na vše.
Žádný háček, žádné náklady
- Připsáno na váš účet OnBuy
- Využijte je při dalším nákupu
- Ušetřete nebo si je vyberte
Staňte se Cashback VIP
Už po 1 nákupu získáte lepší nabídky a ceny