For Pac-12 Portable Shortwave Antenna Base M10 Threaded Interface for Vehicle-Mounted Antenna Outdoors Instrument Part

For Pac-12 Portable Shortwave Antenna Base M10 Threaded Interface for Vehicle-Mounted Antenna Outdoors Instrument Part Popis

1: This base is used to set a vehicle-mounted antenna base outdoors
2: The standard ground grid recommends using 4 3.5-meter 0.5-2.5 square soft wires, and the enhanced ground grid can be matched according to the 1/4 wavelength of the used band (not included in the delivery list)

The for Pac-12 portable shortwave antenna only requires a basic M10 thread.
Part name: MSK-04 antenna base for Pac-12
Block M = SO239
Size: 7.3 x 3.9cm
Model: MSK-04 for Pac-12
Antenna interface: M female socket
Feeder interface: M female socket
Ground interface: M10 thread
Standing wave: Less than 1.5 (ground installation matches the ground grid)
Power tolerance: 200 for watts (FT8 100 forwatts)
Weight: base is about 165g,
Height: about 73mm (including M height)
Diameter: about 39mm (excluding M female socket)
Connection way: ANT end connects to the vehicle antenna, GND end is covered with ground grid and then screwed the ground , after plugging into the ground, the ground grid is laid flat in 4 directions, and the M male feeder is used to connect the base. Please pay attention to the radio standing wave table when using (standing wave should be as Less than 1.8 as possible)
(M10 thread interface)
Color: silver
Material: stainless steel

Package Contents:
1 * MSK-04 antenna base (only includes antenna base, other accessories are not included)