Fuel Injector Tester and Cleaner Tool Kit DIY Cleaning Tool Kit 8 Pulse Modes for Injector Tester 2 Simultaneously Test

Fuel Injector Tester and Cleaner Tool Kit DIY Cleaning Tool Kit 8 Pulse Modes for Injector Tester 2 Simultaneously Test Popis

[Simultaneous Testing of 2 Injectors] The fuel injector cleaner tester helps you diagnose and clean fuel injectors, easily identifying common faults such as stuck, clogged, leaking, or burnt fuel injectors. Unlike other fuel injector cleaners and testers that only have one pair of pulse output temperatures (black and red test leads)
[8 Pulse Modes, Mode Lock Function, and LCD Display] The fuel injector tester kit features an LCD display and 8 pulse modes, consisting of 4 pulse signal output modes and 2 output voltage levels: short/medium/long/continuous pulse modes + high/low (12V/5V) power drive modes. This fuel injector cleaner helps you identify good and bad injectors
[4 Size Adapters and Wide Compatibility]Our injector cleaner is compatible with 12V injectors from almost all car models, suitable for EFI and GDI injectors. It comes with a large and a small universal adapter for most injector models (except and ), N series adapter with threaded holes, such as N14/N18/N20/N26/N53/N54/N55/N63/S63.
[40-inch Power Cord and 20-inch Test Lead]The power cord is to 40 inches/100 cm long, and the test lead is 20 inches for easy connection and use. The wires are made of high-quality silicone for better resistance to high and low temperatures. The fuel injector cleaning kit is powered by a 12V battery or an external 12V
[Reverse Polarity Protection and Short Circuit Protection]This fuel injector cleaner and tester features reverse protection for the power input and short circuit protection for the output. If the fuel injector is damaged or the pulse output terminal is short-circuited, the power indicator light the fuel injector cleaner will flash to alert you.

EASY TO OPERATE THE FUEL INJECTOR TESTER

1. Turn off the vehicle engine.
2. Unplug the injector wires of the vehicle to be tested, and then connect a pa