Tržiště s Cashback Okamžitý výdělek na všechno Doprava zdarma na milionech produktů Vysoce hodnocené Vynikající hodnocení na Trustpilotu Staňte se VIP členem Cashback Vyšší sazby, lepší nabídky 30denní možnost vrácení zboží Plus ochrana nákupu

Sorry, this item is temporarily out of stock.

H ELTEC AUTOMATION Meshtastic Wi-Fi Vision Master E213 E-Ink LoRa Node with HT-M7603 LoRa Gateway 915mhz US PLUG

New

4 988,31 Kč

Podobné produkty, které by se vám mohly líbit

Síťové směrovače

Would you like us to let you know when it's back?

Přidat do košíku

Popis a podrobnosti

Shrnutí

HT-M7603 is a high cost-effective indoor standard LoRaWAN gateway, which can be used independently or as a blind filling gateway. With simple configuration, it allows you to bridge LoRa wireless networks to IP networks and different network servers via Wi-Fi or Ethernet.This gateway has a sleek, contemporary design.
Support LoRaWAN Class A, Class C, custom MQTT protocols: By selecting Gateway Mode, the M7603 can switch working modes, supporting bothLoRaWAN and custom MQTT.
Low cost blind filling gateway: With its low cost and compact size, the HT-M7603 can be installed anywhere indoorsand can be used independently or as a blind filling gateway. It is wall-mounted, can be easily placed anywhere indoor to ensure that it provides adequate signal coverage.
Vision Master E213 is an E-Ink development kit with multiple wireless drive methods. Users can operate the display via Bluetooth,Wi-Fi and LoRa. This board is equipped with a default 2.13-inch black and white E-Ink display screen, continuous display for 180 days after power outage.
It is compatible with Arduino, PlatformIO, Micpython and other development frameworks, can be used to develop applications such as electronic tags and identity tags, it is also possible to run open source projects like Meshtastic.

H ELTEC AUTOMATION Meshtastic Wi-Fi Vision Master E213 E-Ink LoRa Node with HT-M7603 LoRa Gateway 915mhz US PLUG Popis

HT-M7603 is a high cost-effective indoor standard LoRaWAN gateway, which can be used independently or as a blind filling gateway. With simple configuration, it allows you to bridge LoRa wireless networks to IP networks and different network servers via Wi-Fi or Ethernet.This gateway has a sleek, contemporary design.
Support LoRaWAN Class A, Class C, custom MQTT protocols: By selecting Gateway Mode, the M7603 can working modes, supporting bothLoRaWAN and custom MQTT.
Low cost blind filling gateway: With its low cost and compact size, the HT-M7603 can be installed anywhere indoorsand can be used independently or as a blind filling gateway. It is wall-mounted, can be easily placed anywhere indoor to ensure that it provides adequate signal coverage.
Vision Master E213 is an E-Ink development kit with multiple wireless drive methods. Users can operate the display via ,Wi-Fi and LoRa. This board is equipped with a default 2.13-inch black and white E-Ink display screen, continuous display for 180 days after power outage.
It is compatible with , PlatformIO, Micpython and other development frameworks, can be used to develop applications such as electronic tags and identity tags, it is also possible to run open source projects like Meshtastic.

HT-M7603 Gateway Main Features:
MT7628 MCU, SX1303 + SX1250 Chip
Wi-Fi and Ethernet supported
Maximum output: 27 2dBm
The power supply voltage:5V

E213 E-Ink Main Features:
ESP32-S3FN8 MCU, support Wi-Fi and BLE.
Low power consumption, 20uA in deep sleep, continuous display for 180 days after power outage.
Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching).
Onboard 2.13 inch 250 x 122 pixels display, support for partial refresh.
Storage condition: -25 ~ 70, less than equal 45%