LED Motion Sensor , IR Activated LED Controller with USB Cable for LED Light Strips

LED Motion Sensor , IR Activated LED Controller with USB Cable for LED Light Strips Popis

About this product
LED Motion Sensor: Infrared human body sensor is widely used in LED light strips, motion lighting, human monitoring, automatic sensing equipment, etc. Controlled by motion.
Parameters: LED motion sensor output current: Less than 2A; Working voltage: 5-24V; Output power: Less than 20W; Delay : 5-3600 seconds;
Size: 36x36x27mm/1.42x1.42x1.06 inches (L x W x H); Total length (including cable): 30.5cm/12 inch

Advantages: 1. The LED sensor is designed with ABS plastic, which is very durable and well insulated.
2. The size does not take space.
3. The setting can be delayed from 5-3600 seconds, saving and .
4. The infrared automatic sensing device no longer needs to manually the light and off, freeing your hands.
Use Tips: When the LED sensor is started, the signal triggered by the module is unstable and needs to be preheated for 1 minute to work properly. The installation direction is left and right, and the signal will be better.
Note: 1. Do not expose it to direct sunlight, heaters, strong winds or air conditioners.
2. Do not fix it obstacles that infrared rays cannot penetrate.
3. The signal output and input lines of the controller should be connected correctly.
Due to different factory batches, there are slight differences in the color and appearance of product accessories, but it does not affect normal use
Color: White
Material: ABS

Package Contents:
1 x Infrared human body induction
1 x Double-sided sticker
2 x Screws