Produktbilder
Sorry, this item is temporarily out of stock.
RC3563 1000mAh Handheld Battery Resistance Tester
New
58,45 €
Ähnliche Produkte, die dir gefallen könnten
Would you like us to let you know when it's back?
Beschreibung & Details
Zusammenfassung
- Accurate Measurement: RC3563 battery tester can measure the internal resistance and voltage of the battery at the same time, adopting four wire test clamp, better avoiding the influence of contact resistance and wire resistance, and able to carry out more accurate measurement.
- Intelligent Control: Battery internal resistance meter adopts intelligent control, LCD display and implanted Kalman filter math algorithm, which has the advantages of high accuracy, high efficiency, light weight, energy saving and environmental protection.
- 1000mAh Lithium Battery: Battery internal resistance detector built in 1000mAh lithium battery, 5V charging, for android cell phone charger can be used, very convenient.
- Scope of Application: Handheld battery internal resistance tester is widely used in all kinds of battery production, maintenance, testing, scientific research laboratory and other occasions.
- Multipurpose: Battery internal resistance tester can also be used to measure the AC resistance of capacitors and low resistance value high accuracy resistance.
RC3563 1000mAh Handheld Battery Resistance Tester Beschreibung
RC3563 Battery Tester High Accuracy Handheld Battery Internal Resistance Tester with LCD Display Screen
Item Type: Battery Internal Resistance Tester
Material: ABS
Rated Operating Conditions:
Working Environment: -10 To +40 Relative Humidity <80%
Storage Environment: -20 To +80 Relative Humidity <80%.
Technical Specifications:
Basic Accuracy Of Resistance: 0.5%
Basic Accuracy Of Voltage: 0.5%
Resistance Measurement Range: 1uΩ-200Ω
Voltage Measurement Range: 0.0001V To 100VDC
Test Signal Frequency: AC 1KHz
Test Signal Current: 2mΩ 20mΩ 50mA
200mΩ 2Ω Gear 5mA
20Ω 200Ω Stages 0.5mA
Serial Port: Need To Be Opened In The Machine To Communicate With The Computer, The Default Is Closed, Baud Rate Of 115200
Resistance Range: 6 Ranges Automatically And Manually.
Voltage Range: 3 Ranges Automatically And Manually
Display Update: 5 Times Per Sec
Resistance Calibration: Each Range Individually Calibrated Manually, Do Not Affect Each Other
Calibration XY Calibration: Belong To The Resistance Calibration Range, Recalibrate, Enter Into The Resistance Calibration, Press The Setup "SET" Key, Enter Into The Calibration.
CALXY Calibration, At This Time, You Must Clamp The Calibration Resistor Around 20mΩ, Long Press The R Key, X, Y Calibration Results, Calibrate In The Same Number For Many Times Is Good
Voltage Calibration: Each Range Is Calibrated Manually Without Affecting Each Other.
Factory Settings: Save The Factory Information, One Key Can Restore The Factory Status.
Backlight Control: Enter The Setting Menu To Turn Off And On.
Energy Saving Settings: 20 Minutes Delay, No Operation Automatically Shutdown
Charging Power: 5V 1A Charging, Suitable For Android Phone Charger (Not Included)
Built In Lithium Polymer Battery: 1000mAh
Details
| OPC | PSXQJJZ |
|---|---|
| Codes | 7641393384150 (EAN) |
Would you like us to let you know when it's back?
RC3563 1000mAh Handheld Battery Resistance Tester
New
58,45 €
Das könnte Ihnen auch gefallen