Produktbilleder
2.4G Wireless 2 Players for Arcade USB Arcade Zero Delay Joystick Encoder PCB Board for Diy Arcade Game Console Parts.
Brand kepptory
Ny
På lager
Derfor vil du elske at handle hos OnBuy:
- Tjen Cashback på hvert køb – brug det med det samme på din næste ordre
- Gratis levering – på millioner af varer på siden
- Kunder elsker os – 126,000 anmeldelser med vurderingen “Fremragende”
144,86 kr.
Gratis levering
1%
Tjen 1,45 kr. med det samme
Læs mere
Priserne for varer, der sælges af OnBuy, inkluderer moms.
Rentefrie betalingsmuligheder
Se fuld produktbeskrivelse og detaljer
Levering: Standard (Gratis) | tir. 23. - lør. 27. jun.
Returnering: 30 dage
180 dages betalingsbeskyttelse
Beskrivelse og detaljer
Oversigt
- 2.4G Wireless 2 Players for Arcade Encoder PCB Board generally used in PC/computer games, multiplayer games, Android smart TVs, set-top boxes, various arcade game consoles, etc...
- 2 motherboards are all the same. The one who powers on first will have the P1 indicator light always on green, and the second PCB motherboard will have the P2 indicator light always on red. When the battery is low, the indicator light will slow down and give an alarm. The battery needs to be replaced.
- The motherboard usually uses two 5V/7V batteries with 3V power, and it is not recommended to use a 3.7V lithium battery. Long term use may burn out the main control chip. If you want to use a rechargeable motherboard, you need to order a rechargeable one.
- If the motherboard is powered on but not connected to the receiver, the red and green lights will flash slowly. After flashing for several tens of seconds, it will enter sleep mode. Press the MODE/START button to wake up the motherboard.
- The indicator light on the receiving head remains on when connected. Even if the game is not played, it will still enter sleep mode after 5-6 minutes. Press the MODE/START button to wake up the motherboard.
2.4G Wireless 2 Players for Arcade USB Arcade Zero Delay Joystick Encoder PCB Board for Diy Arcade Game Console Parts. Beskrivelse
2.4G Wireless 2 Players for Arcade Encoder PCB Board generally used in PC/computer games, multiplayer games, Android TVs, set-top boxes, various arcade game consoles, etc...
2 motherboards are all the same. The one who powers first will have the P1 indicator light always green, and the second PCB motherboard will have the P2 indicator light always red. When the battery is low, the indicator light will slow down and give an alarm. The battery needs to be replaced.
The motherboard usually uses two 5V/7V batteries with 3V power, and it is not recommended to use a 3.7V lithium battery. Long term use may burn out the main control chip. If you want to use a rechargeable motherboard, you need to order a rechargeable one.
If the motherboard is powered but not connected to the receiver, the red and green lights will flash slowly. After flashing for several tens of seconds, it will enter sleep mode. Press the MODE/START button to wake the motherboard.
The indicator light the receiving remains when connected. Even if the game is not played, it will still enter sleep mode after 5-6 minutes. Press the MODE/START button to wake the motherboard.
2.4G Wireless 2 Players Arcade Encoder PCB Board generally used in PC/computer games, multiplayer games, Android TVs, set-top boxes, various arcade game consoles, etc...
2 motherboards are all the same. The one who powers first will have the P1 indicator light always green, and the second PCB motherboard will have the P2 indicator light always red. When the battery is low, the indicator light will slow down and give an alarm. The battery needs to be replaced.
The motherboard usually uses two 5V/7V batteries with 3V power, and it is not recommended to use a 3.7V lithium battery. Long term use may burn out the main control chip. If you want to use a rech
Detaljer
| OPC | PTGY899 |
|---|---|
| Mærke | kepptory |
| Koder | 6033967243177 (EAN) |
Produktdata
| Height | 2cm |
|---|---|
| Width | 5cm |
| Length | 7cm |
| Weight | 0.0185kg |
| Colour | Black |
| Material | PC+Plastic |
Sammenlign sælgere for 2.4G Wireless 2 Players for Arcade USB Arcade Zero Delay Joystick Encoder PCB Board for Diy Arcade Game Console Parts.
- Ny fra 144,86 kr.
| Sælger | Bedømmelser | Garanti | Returneringer | Pris | Levering | I alt | Antal |
|---|---|---|---|---|---|---|---|
|
Afsendt fra:
|
(155 anmeldelser) | - |
30 dage
Gratis retur Nej
|
144,86 kr.
|
+Free Delivery
Forventet levering:
23-27 jun.
|
144,86 kr.
|
Tjen penge, mens du handler med øjeblikkelig Cashback på alt.
Ingen hage, ingen omkostninger
- Indbetalt til din OnBuy-konto
- Brug dem på dit næste køb
- Gem det eller hæv det
Bliv Cashback VIP
Bare 1 køb giver adgang til bedre tilbud og priser