Produktbilleder
På lager
Derfor vil du elske at handle hos OnBuy:
Priserne for varer, der sælges af OnBuy, inkluderer moms.
Rentefrie betalingsmuligheder
Se fuld produktbeskrivelse og detaljer
Levering: Standard (14,95 kr.) | fre. 27. - man. 30. nov.
Solgt af: firstlove
Returnering: 30 dage
180 dages betalingsbeskyttelse
Oversigt
1. Battery and motherboard cable can not be too thin, try to be thicker. Fast charging board requirements can pass 10A current non-fast charging board should also be able to pass 7A current. Can not be too long, the interface needs to be welded.
2. Batteries can only be connected in parallel (parallel number is not limited), not in series, series must burn the motherboard.
3. Normal application, the battery must be welded, (wire twisting will be insufficient power supply), the battery reverse motherboard must burn. Never pay attention. as thick and short.
4. Access to the battery to determine access to the 3.7V battery, not other batteries. Ensure that the battery is not connected in series, otherwise the battery terminal access voltage higher than 4.5V may burn the board.
1. Use of high-quality materials, product quality is guaranteed
2. Small volume, high power, high efficiency, complete protocols, mainstream open protocols are basically supported
3.Module Compatible?with 3.7V lithium batteries, including polymer, 18650, 21700 lithium batteries; to ensure that the battery is not aging, the battery can be connected in parallel can not be connected in series
4. Module volume is relatively small, the heat dissipation area is limited, high-power output heat is a normal phenomenon
5. Wide range of product applications, suitable Compatible?with a variety of industrial DIY occasions
Parameter:
full protocol, the mainstream open protocol basically support the charging current to 5A, efficiency to 96% output power to 22.5W, efficiency to 95%.
Automatic load detection / light load detection
Support small current mode
Output overcurrent/short circuit protection
Charge timeout/over-voltage protection
Support PPS/PD3.0/PD2.0
Support QC4+/QC4/QC3.0/QC2.0
Support FCP, SCP (5V4.5A or 4.5V/5A)
S
Detaljer
| OPC | PYVF7D7 |
|---|---|
| Mærke | Bobotron |
| Koder | 4712706889501 (EAN) |
| Produkt- og sikkerhedsoplysninger |
Produktdata
| Height | 2cm |
|---|---|
| Width | 6cm |
| Length | 8cm |
| Weight | 0.04kg |
| Colour | Purple |
| Material | PCB |
| Sælger | Bedømmelser | Garanti | Returneringer | Pris | Levering | I alt | Antal |
|---|---|---|---|---|---|---|---|
|
Afsendt fra:
|
(25 anmeldelser) | - |
30 dage
Gratis retur Nej
|
198,05 kr.
|
+14,95 kr. Delivery
Forventet levering:
27-30 nov.
|
213,00 kr.
|
Tjen penge, mens du handler med øjeblikkelig Cashback på alt.
Ingen hage, ingen omkostninger
Bliv Cashback VIP
Bare 1 køb giver adgang til bedre tilbud og priser
Du får kun øjeblikkelig Cashback hos OnBuy! Indtast din e-mail nedenfor, så sender vi dig en kopi af din kurv, så du sparer tid senere.
Når du indtaster din e-mailadresse, bliver du automatisk tilføjet til vores database, hvor du kan få personlige Cashback-tilbud og tidlig adgang til vores bedste tilbud. Du kan til enhver tid afmelde vores e-mails, og vi deler aldrig dine oplysninger med andre. Læs mere i vores privatlivspolitik og vilkår og betingelser.
Vil du have adgang til personlige tilbud og de højeste Cashback satser? Tilmeld dig vores nyhedsbrev nedenfor.
Du kan til enhver tid afmelde vores e-mails, og vi deler aldrig dine oplysninger med andre. Læs vores privatlivspolitik og vilkår og betingelser for at få mere at vide.
Denne side er udløbet.
Opdater og fortsæt