2X DC6-30V 140W Multi-Protocol Fast Charging Module Supporting QC4.0+/5.0 PD FCP SCP SFCP AFC Fast Charger Board

2X DC6-30V 140W Multi-Protocol Fast Charging Module Supporting QC4.0+/5.0 PD FCP SCP SFCP AFC Fast Charger Board Beskrivelse

Support QC4+/PD3.0/PPS and other fast charging protocols, suitable for mainstream devices. to 140W, meet the fast charging needs of high-power devices such as laptops/mobile phones
DC6-30V input, suitable for various power supply scenarios such as car/power supply
Integrated thermistor temperature protection, and equipped with an extra-large heat sink, safe and does not damage the machine
Multiple protection mechanisms input overvoltage, undervoltage protection, output overcurrent, short circuit protection, etc.
Module input method problem: This module can be understood as a charger that integrates multiple protocols, but it cannot be connected to AC power. It needs to be used with a power supply (power adapter). It is recommended to use a 24V power supply. If you need a 100W output, consider the power life at x 20%, so choose a 24V5A power supply; 200W output requires a 24V10A power supply.

Input voltage:DC6-30V
Recommended input parameters: DC24V 7A
Boost and buck type: buck (input must be greater than output 1.2V)
Input and output type: only supports output (battery power supply is not recommended)
Output interface:USB-A and USB-C
Input socket size:5.5x2.1MM (DC5521)
Support full-speed PPS3.3-21V 6.3A 133W
Support PD140W 20V7A@140W
Support QC5/QC4+/QC3+/QC2.0
Support AFC/FCP/high voltage SCP/SFCP
Output power problem: Since the module is a step-down module, the output must be greater than the input 1.2V. Since 140W is 20V7A of the PD protocol, it can only be fully output if it is greater than 21.2V.
Battery power supply problem: The module can only output and cannot charge the battery. If it is only powered by a battery, it can be used with a 24V battery pack. If it is a car 12V, 12V cannot be full power, the PD protocol is to 36W, and it is no problem to only charge t