Sorry, this item is temporarily out of stock.
2X PDB Power Distribution Board with 12V Linear Voltage Regulator DIY Parts for FPV Multicopter FPV Camera Drone
Lignende produkter, vi tror du vil kunne lide
Would you like us to let you know when it's back?
Oversigt
- Can power the 12V camera & 12V LED without ripple & noise.
- Support 3-6S Lipo input.
- Support 3S battery, but the output voltage= 3S-1V
- 25 indoor,16V input, 12V output 500mA in 5mins, the measured temp. on chip is 54
- If the mounting hole is unsuitable, you can stick it on the frame kit by double-side sponge tape
2X PDB Power Distribution Board with 12V Linear Voltage Regulator DIY Parts for FPV Multicopter FPV Camera Drone Beskrivelse
Can power the 12V camera & 12V LED without ripple & noise.
Support 3-6S Lipo input.
Support 3S battery, but the output voltage= 3S-1V
25 indoor,16V input, 12V output 500mA in 5mins, the measured temp. chip is 54
If the mounting hole is unsuitable, you can stick it the frame kit by double-side sponge tape
Item Name: PDB & Linear Regulator 12V
Working Voltage: 3-6S LiPo
Linear Output Voltage: 12V(4-6S IN),accuracy 2.5%
Linear Output Current: 500mA(4S IN),200mA(6S IN)
Size: 40x22mm
Weight: 6g
Mounting: 24mm / 3mm
Colour:As Shown
Material:PC
Package Contents:
2 x PDB Board With Linear Regulator 12V(The circuit board printing is slightly different, which does not affect the use)
Detaljer
| OPC | PXQBMT8 |
|---|---|
| Koder | 4712691409517 (EAN) |
| Produkt- og sikkerhedsoplysninger |
Produktdata
| Height | 2cm |
|---|---|
| Width | 5cm |
| Length | 8cm |
| Weight | 0.009kg |
| Colour | As Shown |
| Material | PC |