2X SPI to CANFD Module MCP2518FD Module ATA6560 Transceiver CAM Bus Module Super MCP2515 Controler Module

2X SPI to CANFD Module MCP2518FD Module ATA6560 Transceiver CAM Bus Module Super MCP2515 Controler Module Beskrivelse

External CANFD with Serial Peripheral Interface (SP1)
The controller has a maximum arbitration bit rate of 1Mbps and a maximum data bit rate of 8Mbps
CANFD controller mode
CAN20B and CAN FD hybrid mode
Compliant with ISO 11898-1:2015

Stability: The CAN interface is equipped with a bridge stack, which can release and protect the circuit from damage signals such as static electricity, group pulses, and surges.
Lamp: The motherboard is equipped with a green power indicator light that lights when powered .
Terminator: The module has a terminal resistor of 120 ohms, which is connected through pin P3. When using a terminal resistor, short circuit pin P3.
Supply Voltage: 5V and 3.3V, connected through pins, are powered as follows:When the IO level of the main control system is 3.3V, it is necessary to power the module with 5V and 3.3V respectively. When the TO level of the main control system is 5V, only 5V is needed to power the module and short circuit pin P2.
Colour:Black
Material:Plastic

Package Contents:
2x SPI to CANFD Module