Active Balancer 1.2A Equalizer 14S Li-Ion Lifepo4 Transfer Board LTO Lithium Battery 14S

Active Balancer 1.2A Equalizer 14S Li-Ion Lifepo4 Transfer Board LTO Lithium Battery 14S Beskrivelse

1.2A Active Balancer Inductive Active Balance 14S
Will only balance two nearby battery which voltage defference bigger than 0.2V
Functions of the board: A freewheeling diode is added. The freewheeling diode is often used together with the storage element to prevent sudden changes in voltage and current, provide access and protect the balance board. Another change is to use inductance with larger volume and power, which is conducive to heat dissipation.
Balance indication: 1. When the equalization light is , the equalization work is turned . 2. The equalization light goes out, the equalization circuit sleeps. 3. The equalization light flashes, the string indication is lost, or the circuit is faulty.
Principle of equilibrium: This module is adjacent to the differential pressure equalization, and the adjacent battery voltage difference reaches 0.1V or more.

The internal trigger balance is working until the adjacent battery voltage difference stops within 0.03V.
There is an adjacent differential pressure when charging and discharging the battery pack.
Trigger equalization, the battery pack voltage error will be pulled back to the ideal value, reducing battery maintenance costs.
Working voltage is 2.0V-4.5V, ternary iron lithium battery is common, lithium cobalt oxide battery is not applicable.
Equilibrium current:
Adjacent pressure difference is 0.1V or more (current is about 0.5-0.7A);
Adjacent pressure difference is above 0.2V (maximum equalization current is 1.2A);
The smaller the differential pressure, the smaller the equalization current.
Wiring definition:
B-, the total negative pole of the battery pack (the negative pole of the first battery)
B1, the positive electrode of the first battery
B2, the positive electrode of the second battery
B3....... and so .
Note:13 or more string plugs need to be inserted obliquely, first touch the B-pins and