Pneumatic Chamfering Tool 45 Degree Metal Deburring Trimming Machine Arc Beveler Kit for Engineering

Pneumatic Chamfering Tool 45 Degree Metal Deburring Trimming Machine Arc Beveler Kit for Engineering Beskrivelse

Pneumatic tool oil injection required for optimal performance.
Continuous use requires additional oil injection after 3 hours.
Machine should idle for 10 seconds after oil injection for lubrication.
Designed for mechanical use with an output of 6-8kg.
Prevents water and oil from entering the machine to avoid adhesion and performance issues.
Usage and maintenance tips: Before using the new machine, please inject pneumatic tool oil and inject about 4C.C into the air inlet. After continuous use for about 3 hours, about 4C.C is also injected into the air inlet. After injecting pneumatic tool oil, let the machine idle for about ten seconds (do not operate), and let the internal parts of the grinder be lubricated as a whole before proceeding. It is an air compressor (air pump) for mechanical use. The output of the air compressor is about 6~8kg. Generally, most of the compressed atmosphere of a traditional air compressor contains water, and the piston of the air compressor brings out a small part of the lubricating oil. If the oil-water separator is not used, water and oil and atmosphere will enter the inside of the machine for a long . The occurrence of adhesion slows down the rotation of the machine, resulting in insufficient speed and torque. In this way, the pneumatic tool oil needs to be input into the air inlet, and the machine can be used normally after idling for about ten seconds.
Color: Silver & Black
Material: Metal

Package Contents:
1 set Pneumatic Chamfering Tool