Markedspladsen med Cashback Optjen på alt med det samme Gratis levering på millioner af produkter Højt vurderet Fremragende Trustpilot-anmeldelser Bliv Cashback VIP Højere rater, bedre tilbud 30 dages returret Plus købsbeskyttelse

Sorry, this item is temporarily out of stock.

Proxmark3 Develop Suit Kits V5.0 512K 3.0 Proxmark NFC PM3 RFID Reader Writer for RFID NFC Card Copier Clone Crack 2 USB

New

419,42 kr.

Lignende produkter, vi tror du vil kunne lide

Forbindelser til printkort

Would you like us to let you know when it's back?

Læg i kurv

Beskrivelse og detaljer

Oversigt

1. Built-in high-frequency antenna, matching antenna depth, eliminating blind spots, reading the entire data card without interruption. Increase the frequency of the key, the size of the card can accommodate everything. Data analysis, completely stable, and low error rate.The low frequency antenna improves the signal-to-noise ratio, the recognition speed is higher, and the mobile design can meet various needs.
2. No antenna interface, no need to connect because it is easily damaged. Cancel lithium battery, easy and convenient. (In offline mode, you can use mobile power). Except that it has nothing to do with the old relay, it has low cost, light weight and easy to carry. Compatible with all official firmware, can clean any version as needed. Depending on your preference, you can use the official "command line" or "Proxmark Tool.exe" to work
3. DOUBLE port usb. From AT91SAM7S256 to AT91SAM7S512. (Low-frequency antenna is installed on the right) Antenna #LF: 30.41 V @ 125.00 kHz; Antenna #LF: 22.01 V @ 134.00 kHz; #HF antenna: 28.43 V @ 13.56 MHz; (Low-frequency antenna is installed on the left) Working voltage:3.5-5.5V, Current work: 50-130mA
4. NOTE:The phone stickers and glue cards in the product pictures are sent randomly without remarks. The new machine shows v3, which is a printing problem. You can directly flash the v5 firmware without affecting the use. Please note.
Proxmark3

Proxmark3 Develop Suit Kits V5.0 512K 3.0 Proxmark NFC PM3 RFID Reader Writer for RFID NFC Card Copier Clone Crack 2 USB Beskrivelse

1. Built-in high-frequency antenna, matching antenna depth, eliminating blind spots, reading the entire data card without interruption. Increase the frequency of the key, the size of the card can accommodate everything. Data analysis, completely stable, and low error rate.The low frequency antenna improves the signal-to-noise ratio, the recognition speed is higher, and the mobile design can meet various needs.
2. No antenna interface, no need to connect because it is easily damaged. Cancel lithium battery, easy and convenient. (In offline mode, you can use mobile power). Except that it has to do with the old relay, it has low cost, light weight and easy to carry. Compatible with all official firmware, can clean any version as needed. Depending your preference, you can use the official "command " or "Proxmark Tool.exe" to work
3. DOUBLE port usb. From AT91SAM7S256 to AT91SAM7S512. (Low-frequency antenna is installed the right) Antenna #LF: 30.41 V @ 125.00 kHz; Antenna #LF: 22.01 V @ 134.00 kHz; # antenna: 28.43 V @ 13.56 MHz; (Low-frequency antenna is installed the left) Working voltage:3.5-5.5V, Current work: 50-130mA
4. NOTE:The phone stickers and glue cards in the product pictures are sent randomly without remarks. The new machine shows v3, which is a printing problem. You can directly flash the v5 firmware without affecting the use. Please note.

Card operation mode:
1. Ordinary M1 S50 card reader and other Type B 14443A cards
2. Analyze PRNG 0 using department-specific security
3. Use embedded (mfoc) security to solve the entire map
Analog card mode:
1.Simulate the user ID of IC S50/Ultralight/DESFire series cards
2.Analog data M1 S50 for the entire sector.(Select card reader)
3.Simulate the shell M1 S50 and obtain the data used to calculate the key(select card reader)
Silent

Detaljer