Robot Hand Five Fingers Metal Manipulator Arm Left Hand for Humanoid Robot DIY Kit

Robot Hand Five Fingers Metal Manipulator Arm Left Hand for Humanoid Robot DIY Kit Beskrivelse

Hint: Installation requires some patience and practical skills.
Beware of servo locked-rotor.servo working voltage: 6-8.4V (standard 7.2V), the servo black, red, white lines correspond to negative, positive and signal lines.

6 Way Button Steering Gear Controller:
1) Can control 6 steering gear 1 to 1, real- synchronization 1:1 control.
2) No. 0, No. 1 and No. 2 of the control board have overcurrent protection to prevent excessive current from burning out the steering gear.
3) There is a small button under each button of the control panel. When you press it, the steering gear is in the medium state. The knob cannot control the rotation of the steering gear. Press again to remove the middle state, and the button can continue to control the steering gear.
Size: 76mmx53mm
Weight: 37g
Wiring instructions:
+: Connect to 5-8.4V power supply.
-: Connects to the negative pole of the power supply.
Generally, the steering gear control needs a few v, you can give the control board with a 5V.
Type:Left Hand
Colour:As Shown
Material:Metal

Package Contents:
1 * Robot Hand