Siphon Pump - Suction - PVC - Easy to Clean - Universal

Descripción de Siphon Pump - Suction - PVC - Easy to Clean - Universal

Two optimal usage methods: A. Gravity required (source liquid level at least 11 inches higher than target liquid level). 1. Connect the hose to both ends of the rubber pump. Secure the hose loops. The black arrow on the manual pump points in the flow direction. 2. Place the inlet end of the hose into the source liquid. Secure the hose with a hose clamp to ensure it does not come loose. 3. Squeeze the manual pump 2 to 3 times. 4. When the liquid level is close to the target level, place the outlet hose into the target container. B. No gravity required. 1. The manual pump must be continuously squeezed. 2. Pump pressure must be continuous, and the flow rate can be controlled. Important Notes: The liquid you are pumping must be above the bucket. The manual pump has an arrow marking on its surface. Ensure the arrow points downwards before pumping oil. The connector end must be immersed in the liquid, not just touching the surface. When pumping oil from a car fuel tank, the tank must not contain a pump filter.

If the siphon pump hose is bent, try immersing the bent section in a small amount of warm water for 1 to 3 minutes to straighten it; this will not affect the pump's function.

Not suitable for drinking water, salt water, or any chemical liquids.