2 set M2 M3 M4 M5 Female Thread Knurled Brass Threaded Insert Embedment Nut for 3D Printing Threaded Heat Set Inserts
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 129,000 arvostelua arvosanalla “Erinomainen”
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Vakio (4,12 €) | ke 29. heinä - ma 3. elo
Myyjä: Papishop
Palautukset: 30 päivää
180 päivän maksuturva
Suosituimmat tuotteet kategoriassa Aurinkokennot ja sarjat
Yhteenveto
- All nuts are made of high quality brass, which has high hardness, no deformation, durable and reliable for long use.
- Easy to install: From the moment that the insert has a valve conduit, there is no need to back-drill and counter-sink the hole.
- Widely used on injection molding for well fixing; can be installed by ultrasonic or heat in tapered bore wire, or molded in during injection.
- High quality material brass, heat resistant, wear resistant, rust-proof acid-resistant, anti-corrosive and non-toxic, high hardness for long time use.
- No need for flared or flaring the boss hole since the insert has pilot guide.
2 set M2 M3 M4 M5 Female Thread Knurled Brass Threaded Insert Embedment Nut for 3D Printing Threaded Heat Set Inserts Kuvaus
All nuts are made of high quality brass, which has high hardness, no deformation, durable and reliable for long use.
Easy to install: From the moment that the insert has a valve conduit, there is no need to back-drill and counter-sink the hole.
Widely used injection molding for well fixing; can be installed by ultrasonic or heat in tapered bore wire, or molded in during injection.
High quality material brass, heat resistant, wear resistant, rust-proof acid-resistant, anti-corrosive and non-toxic, high hardness for long use.
No need for flared or flaring the boss hole since the insert has guide.
Application: Heat resistant, great for 3d printing
Colour: brass color
Material: brass
Package Contents:
18 x M2 x 4mm x 3.5mm Nut
18 x M2 x 6mm x 3.5mm Nut
18 x M2 x 8mm x 3.5mm Nut
18 x M2 x 10mm x 3.5mm Nut
18 x M3 x 4mm x 5mm Nut
18 x M3 x 6mm x 5mm Nut
18 x M3 x 8mm x 5mm Nut
18 x M3 x 10mm x 5mm Nut
12 x M4 x 4mm x 6mm Nut
12 x M4 x 6mm x 6mm Nut
10 x M4 x 8mm x 6mm Nut
10 x M4 x 10mm x 6mm Nut
8 x M5 x 6mm x 7mm Nut
8 x M5 x 8mm x 7mm Nut
8 x M5 x 10mm x 7mm Nut
Tiedot
| OPC | PWJGTCS |
|---|---|
| Brändi | Typecat |
| Koodit | 6033511122248 (EAN) |
| Tuote- ja turvallisuustiedot |
Tuotetiedot
| Height | 2.5cm |
|---|---|
| Width | 10cm |
| Length | 17cm |
| Weight | 0.236kg |
| Colour | brass color |
| Material | brass |
Vertaile myyjiä tuotteelle 2 set M2 M3 M4 M5 Female Thread Knurled Brass Threaded Insert Embedment Nut for 3D Printing Threaded Heat Set Inserts
- Uusi alkaen 30,78 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(434 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
26,66 €
|
+4,12 € Delivery
Arvioitu toimitus:
29 heinä - 3 elo
|
30,78 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset