2X LED Flashing Finger Tip Gyroscope DIY Electronic Kit 51 Microcontroller Circuit Board Welding Assemble Components
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 134,000 arvostelua arvosanalla “Erinomainen”
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Vakio (11,82 €) | ke 23. - ti 29. syys
Myyjä: CollBea
Palautukset: 30 päivää
180 päivän maksuturva
Saattaisit pitää myös näistä
Yhteenveto
- The spinning top is a gadget that has beenanded down from ancient times to today. The flash electronic top is a novel electronic ythat combines modern technology and tradition. It not only retains the primitive connotation of the top, but also reflects the attractive charm of modern electronic technology.
- The gyro uses a single chip microcomputer to control 12 light-emitting diodes to flash in turn. The flashing time of each LED and the flashing sequence are controlled by the single-chip microcomputer. When the electronic gyroscope rotates, the corresponding pattern and text will appear.
- In order to improve the stability of patterns and characters, adopts Hall IC to control the regular display of the pattern, that is, every time it rotates, the Hall IC senses the magnet, and then the model is fed back to the microcontroller.
- The coin-cell battery is used for power supply, and the microcontroller automatically enters low power consumption when the battery gyro is turned off. When the switch is pressed, the LED is turned on.
- Welding Assemble Component
2X LED Flashing Finger Tip Gyroscope DIY Electronic Kit 51 Microcontroller Circuit Board Welding Assemble Components Kuvaus
The top is a gadget that has beenanded down from ancient times to today. The flash electronic top is a novel electronic ythat combines modern technology and tradition. It not only retains the primitive connotation of the top, but also reflects the attractive charm of modern electronic technology.
The gyro uses a single chip microcomputer to control 12 light-emitting diodes to flash in turn. The flashing of each LED and the flashing sequence are controlled by the single-chip microcomputer. When the electronic gyroscope rotates, the corresponding pattern and text will appear.
In order to improve the stability of patterns and characters, adopts Hall IC to control the regular display of the pattern, that is, every it rotates, the Hall IC senses the magnet, and then the model is fed back to the microcontroller.
The coin-cell battery is used for power supply, and the microcontroller automatically enters low power consumption when the battery gyro is turned off. When the is pressed, the LED is turned .
Product name:two-page LED fingertip gyro DIY production kit
Product model:TJ-56-307
Working voltage:DC6V (two 2032 button batteries)
Product size:79x26x11mm
Color:As Shown
Material:Metal+Plastic
Package Contents:
2 x Finger Tip Gyroscope DIY Kit
Tiedot
| OPC | PY287S9 |
|---|---|
| Koodit | 4711373408770 (EAN) |
| Tuote- ja turvallisuustiedot |
Tuotetiedot
| Height | 4cm |
|---|---|
| Width | 6cm |
| Length | 9cm |
| Weight | 0.054kg |
| Colour | As Shown |
| Material | Metal+Plastic |
Vertaile myyjiä tuotteelle 2X LED Flashing Finger Tip Gyroscope DIY Electronic Kit 51 Microcontroller Circuit Board Welding Assemble Components
- Uusi alkaen 18,37 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(206 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
6,55 €
|
+11,82 € Delivery
Arvioitu toimitus:
23-29 syys
|
18,37 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset