2X LM1875 DIY Speaker High Power Module Power Amplifier Board Dual Channel 2.0
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 132,000 arvostelua arvosanalla “Erinomainen”
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Vakio (Ilmainen) | ti 1. - la 5. syys
Myyjä: Papishop
Palautukset: 30 päivää
180 päivän maksuturva
Yhteenveto
- The module's anti-noise ability has been greatly increased, the sound is clear and identifiable, very quiet, without impact, and the sound is clean and no noise!
- Using dual-bridge independent power supply, each chip has a separate rectifier bridge and capacitor system power supply, independent of each other, without affecting each other, and further improving the channel separation of the left and right channels!
- The white 3P socket is a common standard socket in the industry, which can be connected to external modules such as decoder boards and Bluetooth modules, and is widely used!
- The blue 3P terminal can be directly modified with various pre-stage tuning boards and volume potentiometers, etc., which is convenient and quick to use!
- Regarding the power supply, we recommend using a 40W-80W dual power transformer 11V-15V. Remember: If the voltage is too high, it will blow up, because this is a small and medium power design, it is a small board, it is best to measure the voltage before powering on!
2X LM1875 DIY Speaker High Power Module Power Amplifier Board Dual Channel 2.0 Kuvaus
The module's anti-noise ability has been greatly increased, the sound is clear and identifiable, very quiet, without impact, and the sound is clean and no noise!
Using dual-bridge independent power supply, each chip has a separate rectifier bridge and capacitor system power supply, independent of each other, without affecting each other, and further improving the channel separation of the left and right channels!
The white 3P socket is a common standard socket in the industry, which can be connected to external modules such as decoder boards and modules, and is widely used!
The 3P terminal can be directly modified with various pre-stage tuning boards and volume potentiometers, etc., which is convenient and quick to use!
Regarding the power supply, we recommend using a 40W-80W dual power transformer 11V-15V. Remember: If the voltage is too high, it will blow , because this is a small and medium power design, it is a small board, it is best to measure the voltage before powering !
Product model: LM1875 dual-channel 2.0 stereo pure power amplifier board
Power supply: dual power transformer 11-15V is recommended not to exceed 15V
Output impedance: 4ohm 8ohm
Power: 2X20W chip output
Advantages: excellent material, simple structure, using power amplifier circuit, good effect, not picky
Just find a small 50W transformer and you can easily bring it !
Colour: black
Material: ABS
Size: 68mm x 76mm
Package Contents:
2 x power amplifier board
Tiedot
| OPC | PWMSG6P |
|---|---|
| Brändi | Typecat |
| Koodit | 6031666918464 (EAN) |
| Tuote- ja turvallisuustiedot |
Tuotetiedot
| Height | 8cm |
|---|---|
| Width | 8cm |
| Length | 8cm |
| Weight | 0.148kg |
| Colour | Black |
| Material | ABS |
Vertaile myyjiä tuotteelle 2X LM1875 DIY Speaker High Power Module Power Amplifier Board Dual Channel 2.0
- Uusi alkaen 28,53 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(436 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
28,53 €
|
+Free Delivery
Arvioitu toimitus:
1-5 syys
|
28,53 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset