2X LM1875 DIY Speaker High Power Module Power Amplifier Board Dual Channel 2.0
I lager
Varför du kommer att älska att handla på OnBuy:
- Tjäna Cashback på varje köp – använd den hur du vill. Spara, spendera eller ta ut.
- Fri frakt – på miljontals produkter på sajten
- Kunder älskar oss – 132,000 recensioner med betyget “Utmärkt”
Priserna för varor som säljs av OnBuy inkluderar moms.
Räntefria betalningsalternativ finns tillgängliga
Se fullständig produktbeskrivning och detaljer
Leverans: Standard (Gratis) | tis 1a - lör 5e sep
Säljs av: Papishop
Returer: 30 dagar
180 dagars betalningsskydd
Du kanske också gillar
Sammanfattning
- The module's anti-noise ability has been greatly increased, the sound is clear and identifiable, very quiet, without impact, and the sound is clean and no noise!
- Using dual-bridge independent power supply, each chip has a separate rectifier bridge and capacitor system power supply, independent of each other, without affecting each other, and further improving the channel separation of the left and right channels!
- The white 3P socket is a common standard socket in the industry, which can be connected to external modules such as decoder boards and Bluetooth modules, and is widely used!
- The blue 3P terminal can be directly modified with various pre-stage tuning boards and volume potentiometers, etc., which is convenient and quick to use!
- Regarding the power supply, we recommend using a 40W-80W dual power transformer 11V-15V. Remember: If the voltage is too high, it will blow up, because this is a small and medium power design, it is a small board, it is best to measure the voltage before powering on!
2X LM1875 DIY Speaker High Power Module Power Amplifier Board Dual Channel 2.0 Beskrivning
The module's anti-noise ability has been greatly increased, the sound is clear and identifiable, very quiet, without impact, and the sound is clean and no noise!
Using dual-bridge independent power supply, each chip has a separate rectifier bridge and capacitor system power supply, independent of each other, without affecting each other, and further improving the channel separation of the left and right channels!
The white 3P socket is a common standard socket in the industry, which can be connected to external modules such as decoder boards and modules, and is widely used!
The 3P terminal can be directly modified with various pre-stage tuning boards and volume potentiometers, etc., which is convenient and quick to use!
Regarding the power supply, we recommend using a 40W-80W dual power transformer 11V-15V. Remember: If the voltage is too high, it will blow , because this is a small and medium power design, it is a small board, it is best to measure the voltage before powering !
Product model: LM1875 dual-channel 2.0 stereo pure power amplifier board
Power supply: dual power transformer 11-15V is recommended not to exceed 15V
Output impedance: 4ohm 8ohm
Power: 2X20W chip output
Advantages: excellent material, simple structure, using power amplifier circuit, good effect, not picky
Just find a small 50W transformer and you can easily bring it !
Colour: black
Material: ABS
Size: 68mm x 76mm
Package Contents:
2 x power amplifier board
Detaljer
| OPC | PWMSG6P |
|---|---|
| Varumärke | Typecat |
| Koder | 6031666918464 (EAN) |
| Produkt- och säkerhetsinformation |
Produktdata
| Height | 8cm |
|---|---|
| Width | 8cm |
| Length | 8cm |
| Weight | 0.148kg |
| Colour | Black |
| Material | ABS |
Jämför säljare för 2X LM1875 DIY Speaker High Power Module Power Amplifier Board Dual Channel 2.0
- Ny från 283,41 kr
| Säljare | Betyg | Garanti | Returer | Pris | Leverans | Totalt | Antal |
|---|---|---|---|---|---|---|---|
|
Skickas från:
|
(436 recensioner) | - |
30 dagar
Gratis returer Nej
|
283,41 kr
|
+Free Delivery
Beräknad leverans:
1-5 sep
|
283,41 kr
|
Tjäna medan du handlar med omedelbar Cashback på allt.
Inga krångel, ingen kostnad
- Betalas in på ditt OnBuy-konto
- Använd det vid ditt nästa köp
- Spara det eller ta ut det
Bli en Cashback VIP
Bara 1 köp låser upp bättre erbjudanden och priser