4Pcs ESP32 Breakout Board GPIO 1 Into 2 for 38PIN Narrow Version ESP32 ESP-WROOM-32 Microcontroller Development Board
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 129,000 arvostelua arvosanalla “Erinomainen”
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Vakio (13,90 €) | ma 27. heinä - la 1. elo
Myyjä: CollBea
Palautukset: 30 päivää
180 päivän maksuturva
Yhteenveto
- COMPATIBILITY (IMPORTANT): Only suitable for 38PIN narrow version ESP32 without mounting holes, not suitable for other versions.
- GPIO 1 INTO 2: This breakout board can expand one GPIO pin of esp32 development board to two, which is convenient for users to reuse all pins in smart home projects. Nice breadboard alternative.
- 2 TYPE CONNECTIONS: Pin Header & Screw Terminal. Just select them according to your purpose.
- DOUBLE-LAYER PCB: The expansion board is a double-layer board. One pin is wired on both sides. Therefore, the circuit is stable and highly reliable, and there will be no poor circuit contact and unstable signal transmission.
- UPDATED VERSION: Compared with the previous version, the board of this version has been soldered completely. No need to solder parts by yourself, which is very convenient to use.
4Pcs ESP32 Breakout Board GPIO 1 Into 2 for 38PIN Narrow Version ESP32 ESP-WROOM-32 Microcontroller Development Board Kuvaus
COMPATIBILITY (IMPORTANT): Only suitable for 38PIN narrow version ESP32 without mounting holes, not suitable for other versions.
GPIO 1 INTO 2: This breakout board can expand one GPIO pin of esp32 development board to two, which is convenient for users to reuse all pins in home projects. Nice breadboard alternative.
2 TYPE CONNECTIONS: Pin Header & Screw Terminal. Just select them according to your purpose.
DOUBLE-LAYER PCB: The expansion board is a double-layer board. One pin is wired both sides. Therefore, the circuit is stable and highly reliable, and there will be no poor circuit contact and unstable signal transmission.
UPDATED VERSION: Compared with the previous version, the board of this version has been soldered completely. No need to solder parts by yourself, which is very convenient to use.
Material:plastic
colour:Green
Package Contents:
4 x ESP32 Breakout Board
Tiedot
| OPC | PWJ7SH2 |
|---|---|
| Koodit | 6032341245639 (EAN) |
| Tuote- ja turvallisuustiedot |
Tuotetiedot
| Height | 4cm |
|---|---|
| Width | 7cm |
| Length | 13cm |
| Weight | 0.15kg |
| Colour | Green |
| Material | plastic |
Vertaile myyjiä tuotteelle 4Pcs ESP32 Breakout Board GPIO 1 Into 2 for 38PIN Narrow Version ESP32 ESP-WROOM-32 Microcontroller Development Board
- Uusi alkaen 43,43 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(202 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
29,53 €
|
+13,90 € Delivery
Arvioitu toimitus:
27 heinä - 1 elo
|
43,43 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset