51 Single-Chip Microcomputer Inductance and Capacitance Frequency Meter DIY Electronic Kit for Welding Practice

Uusi

Varastossa

Miksi tulet rakastamaan ostoksia OnBuyssa:

  • Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
  • Ilmainen toimitus – miljooniin tuotteisiin sivustolla
  • Asiakkaat rakastavat meitä – 139,000 arvostelua arvosanalla “Erinomainen”

Katso koko tuotekuvaus ja tiedot

16,74 €
70,25 € Alennus 76%!
+10,43 € Toimitus
1% Mitä on välitön Cashback? Lue lisää
Lisää koriin

OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.

Korottomat maksuvaihtoehdot saatavilla

Myyjänä Boutique Auto Tools Shop
Pro-myyjä
Vieraile kaupassa
4k+ tilausta

Katso koko tuotekuvaus ja tiedot

Toimitus: Vakio (10,43 €) | pe 4. - to 10. joulu

Palautukset: 30 päivää

180 päivän maksuturva

Lisää koriin

Saattaisit pitää myös näistä

Kuvaus ja tiedot

Yhteenveto

  • When you first power on, the LCD will have a white screen of about 2 seconds. This is because the program is designed in this way. The system will calculate some initial references needed for the subsequent measurement after power-on for 2 seconds. In addition to the power switch being pressed, other switches in the white screen range are required to pop up. If the switch is pressed, the subsequent measurement data will be inaccurate. Remember!
  • After 2 seconds of white screen, the LCD will display: F/C/L Tester, and then you can start to measure the parameters of the components you want.
  • For example, to measure the non-polar capacitance, connect the non-polar capacitance and then press the "test switch of non-polar capacitance". For example, to measure the inductance, connect the inductance and then press the "inductance test switch". Only one of the five function switches can be pressed at the same time. When testing what is pressed, the requirements that are not used will pop up.
  • When testing nonpolar capacitors, inductors, and polar capacitors, these components are connected to the test stand regardless of polarity. For frequency testing, it is necessary to distinguish polarity. Note that.
  • If it is the first time to use the purchased kit after welding, you need to adjust the brightness of the LCD. After 2 seconds of power on, adjust the 10K potentiometer on the top of the board to make the display effect of the 1602 reach a better state.

51 Single-Chip Microcomputer Inductance and Capacitance Frequency Meter DIY Electronic Kit for Welding Practice Kuvaus

When you first power , the LCD will have a white screen of about 2 seconds. This is because the program is designed in this way. The system will calculate some initial references needed for the subsequent measurement after power- for 2 seconds. In addition to the power being pressed, other switches in the white screen range are required to . If the is pressed, the subsequent measurement data will be inaccurate. Remember!
After 2 seconds of white screen, the LCD will display: F/C/L Tester, and then you can start to measure the parameters of the components you want.
For example, to measure the non-polar capacitance, connect the non-polar capacitance and then press the "test of non-polar capacitance". For example, to measure the inductance, connect the inductance and then press the "inductance test ". Only one of the five function switches can be pressed at the same . When testing what is pressed, the requirements that are not used will .
When testing nonpolar capacitors, inductors, and polar capacitors, these components are connected to the test stand regardless of polarity. For frequency testing, it is necessary to distinguish polarity. Note that.
If it is the first to use the purchased kit after welding, you need to adjust the brightness of the LCD. After 2 seconds of power , adjust the 10K potentiometer the top of the board to make the display effect of the 1602 reach a better state.

Specification: Item name: 51 Single-chip Microcomputer Inductance and Capacitance Frequency Meter DIY Electronic Kit
Working voltage: DC9V
Capacitance measurement range: 1pF - 1nF
Inductance measurement range: 1uH-100uH
Frequency measurement range: 0-50KHz
Note: It's diy kits. Need to solder by yourself.
There are differences in components between different batches, which

Tiedot

OPC PYC6Z9T
Koodit 4712521978848 (EAN)
Tuote- ja turvallisuustiedot

Tuotekuvat

51 Single-Chip Microcomputer Inductance and Capacitance Frequency Meter DIY Electronic Kit for Welding Practice 1
51 Single-Chip Microcomputer Inductance and Capacitance Frequency Meter DIY Electronic Kit for Welding Practice 2
51 Single-Chip Microcomputer Inductance and Capacitance Frequency Meter DIY Electronic Kit for Welding Practice

Tuotetiedot

Height3cm
Width10cm
Length19cm
Weight0.143kg
ColourMulticolor
MaterialPCB+components+acrylic

Vertaile myyjiä tuotteelle 51 Single-Chip Microcomputer Inductance and Capacitance Frequency Meter DIY Electronic Kit for Welding Practice

  • Uusi alkaen 27,17 €
Myyjä Arviot Takuu Palautukset Hinta Toimitus Yhteensä Määrä
Lähetetty varastolta: Hong Kong
(152 arvostelua)
-
30 päivää
Ilmaiset palautukset Ei
16,74 €
+10,43 € Delivery
Arvioitu toimitus: 4-10 joulu
27,17 €
Lisää koriin

Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.

Ei koukkuja, ei kuluja

  • Maksetaan OnBuy-tilillesi
  • Käytä se seuraavaan ostokseesi
  • Säästä se tai nosta se

Ryhdy Cashback VIP -jäseneksi

Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset

Turvallisuus- ja tuoteresurssit

Turvallisuuskuvat ja -asiakirjat

Tämä tieto ei valitettavasti ole tällä hetkellä saatavilla. Teemme yhteistyötä myyjän kanssa päivittääksemme tämän osion mahdollisimman pian – tarkista tilanne myöhemmin uudelleen.

Valmistajan tiedot

Tietoja tuotteen valmistajasta.

Huom.: Nämä eivät ole jälleenmyyjän yhteystiedot, joten älä palauta tuotteita tähän osoitteeseen.

YINYING ECOMMERCE TECHNOLOGY LIMITED

xiang gang jiu long jian sha ju qi xian dao nan 4 5 - 5 1 hao qi shi da sha 8 0 3 shi
Kiina
15118066474

[email protected]

Vastuuhenkilö EU:ssa

Tämä tieto ei valitettavasti ole tällä hetkellä saatavilla. Teemme yhteistyötä myyjän kanssa päivittääksemme tämän osion mahdollisimman pian – tarkista tilanne myöhemmin uudelleen.

Odota! Jätit jotakin
taaksesi...

Saat välittömän Cashbackin vain OnBuyssa! Syötä sähköpostiosoitteesi alle, niin lähetämme sinulle kopion ostoskoristasi – näin säästät aikaa myöhemmin.

Syöttämällä sähköpostiosoitteesi liityt automaattisesti tietokantaamme, jolloin saat käyttöösi personoidut Cashback-tarjoukset ja ennakkopääsyn parhaisiin tarjouksiimme. Voit peruuttaa sähköpostiviestimme milloin tahansa, emmekä koskaan jaa tietojasi kenellekään. Lue lisää tutustumalla tietosuojakäytäntöömme ja käyttöehtoihimme.

Ennen kuin lähdet...
Muista, että saat välittömän Cashback-hyödyn kaikesta OnBuyssa!

Haluatko saada henkilökohtaisia tarjouksia ja parhaat Cashback-edut? Tilaa uutiskirjeemme alla.

Voit peruuttaa sähköpostiemme tilauksen milloin tahansa, emmekä koskaan jaa tietojasi kenellekään. Tutustu Tietosuojakäytäntöömme ja ehtoihimme saadaksesi lisätietoja.

Tämä sivu on vanhentunut.

Päivitä sivu jatkaaksesi ostoksia.

Päivitä ja jatka